Lawn & Yard Care

Category Archives for Lawn & Yard Care

how to charge a lawn tractor battery

Riding lawn mower tractor battery reviews


How to Choose the ​right Lawn Tractor Battery that Lasts for Years 

best battery lawn mower

Most lawn tractors in the market today are either electrically driven or battery-powered. But most people opt for the battery-powered ones because they can be moved as far as needed. Unlike the electrically driven lawn mowers, they don’t need to be connected to any power outlet but are rather powered by their batteries.

That means their only issue that could hinder their performance is the lawn mower battery they are using. That is why the riding lawn mower battery is a very sensitive purchase to make. Getting the ​right riding lawn mower tractor battery that perfectly suits the equipment means more efficiency when cutting grass. It also prevents possible damage to the equipment in the long run.

What are some of the top 5 best lawn tractor batteries in the market today?

Heavy duty tractor batteries

​1. Mighty Max Battery 12V 35AH SLA Battery John Deere Tractor Riding Mower

One of the biggest reasons Mighty Max Battery is popular with most buyers is its high performance and durability. It works well for all models of John Deere lawn mowers.

The sealed lead acid(SLA) battery is designed such that it can resist both shock and vibration. The design also allows it to be mounted on any position –except the top side – and still work optimally.

The riding mower  battery has wide-range of operating temperatures. That means it can perform both at low and high temperatures. The tractor battery, thanks to AGM technology, is spill-proof, spill-proof and has a high discharge rate. That means at the end of the day, it will offer the end user a longer service life and reduced chances of damage to their equipment.

Specs:
  • Amperage: 35 AH
  • Voltage: 12 Volt
  • Warranty : 1 Year
  • Dimensions: 7.68 in x 5.16 in x 7.13 in
  • Weight: 23.15 Lbs
Pros:
  • Easy to install
  • Vibration and shock resistant
  • Long shelf and service life
  • Heavy-duty.
  • Sealed off with AGM and thus can be mounted in any position.
  • High discharge rate.
  • Affordable.
  • Requires no maintenance.
Cons
  • None

2​​​​​​.  Chrome Battery Rechargeable 12V 35Ah Sealed Lead Acid Deep Cycle U1 Replaces Husqvarna YTH2448 Lawn Tractor Battery

This tractor  battery from Husqvarna is especially more popular choice when it comes to gardening tools and equipment. Just like the Mighty Max’s battery, this battery is also known for its durability and reliability.

The riding lawn mower battery is designed to be a versatile fit that can fit in well in a variety of applications ranging from mobile scooters to alarm systems. It also features Absorbed glass mat technology(AGM) that reduces the need for maintenance as well as making the lawn tractor battery spill-proof.

Besides, the battery features fiberglass mat separators along with high cell compression that not only helps prolong its shelf but also helps deliver optimal resistance to vibration.

Specs:
  • Amperage : 35Ah
  • Voltage: 12 Volt
  • Dimensions: 7.7 x 5.1 x 6.5 inches
  • Warranty: 18 months
  • Weight: 26 Lbs
Pros
  • Leak-proof
  • Longest shelf-life
  • Maintenance-free
  • Affordable price
Cons
  • None

 

​3. 12V 35Ah Universal Battery for Tractor and Riding Mower

​This battery is very similar to Mighty Max Tractor battery. It is a power box from UPG brand that is also highly reliable and has a high capacity for storing more power. As a result, leading to increased performance. It is also suitable for all John Deere garden and lawn machines.

The rechargeable Sealed Lead Acid battery comes with 12V, 35 Amperes rating and can last for 20 hours after each full charge. The good thing about the battery is that it has no charge-loss effect even  when connected to non-compatible equipment.For added protection, the battery comes with T3 connection terminals.

Besides, the AGM technology makes it  spill-proof by sealing in the acid and preventing it from fizzing out or leakage.

Moreover, its outer casing is fortified with ABS plastic material. That way, it makes the battery shock-absorbent, highly durable, resistant to vibrations. It also makes it resistant to chemical attack  should the battery be exposed to any chemicals.

Specs:
  • Weight:  23 pounds
  • Dimensions:  8 inches by 5.2 inches by 7.1 inches.
  • Warranty: one-year warranty
Pros:
  • Sealed off with aGM, making it spill-proof.
  • Requires no maintenance
  • Has longer-lasting life
  • Affordable
  • Fortified with ABS plastic casing for extra protection.
Cons:
  • Relative heavy compared to to other models

 

4.  Toro Lawn Mower Battery #106-8397 BATTERY-12 V

This Casil’s battery replaces The B & B BP3-12  battery. It is a premium lawn mower tractor battery that works perfectly especially with Lawn Boy mowers, Toro Lawn mowers and AC and CyerPower units.

The battery comes with Absorptive Glass Mat technology that helps absorb shock and protects it from external damage, especially from acid spills. It also ensures that it can be mounted in different positions and still work perfectly. The SLA technology ensures that the battery is spill-proof and leak-free. The reduced electrolyte leakage renders it maintenance free  and increases the longevity of the battery.

How to sharpen lawn mower blades.

 

Specs:
  • Voltage: 12V

  • Amperage : 3.4Ah

  • Construction: SLA, AGM.

Pros:
  • SLA technology that allows for easy mounting

  • AGM technology that increases longevity

  • Highly stable performance

  • Maintenance-free

  • High-shock resistant case

Cons
  • Works well for smaller riding mowers.

 

​5.  ExpertPower EXP12200 12-Volt 20Ah with Threaded Terminals

This is one of the most affordable sealed lead-acid  lawn tractor batteries out there.

The battery is rechargeable and doesn’t  loss charge over time and use. But, it might lose power if it is connected to the wrong equipment.

The battery comes with a rating of 12 volts and 20 Amperes and has a threaded B1 terminal. That means it requires zero insertion force – which translates into maximum durability for the terminals.  Besides, it also features the Absorbent Glass Mat technology(AGM) that keeps the acid tightly locked to prevent spilling or leaking during motion.

The battery doesn’t require regular checking out and maintenance. It only requires to be kept in a clean dry area. But, overcharging it or connecting it to inappropriate equipment can destroy it. Moreover, the battery carries a ABS plastic fortified case that absorbs all the shocks. As a result, offering maximum protect from shock or exposure to acids.

 

Specs:
  • Weight : 12.25 pounds.
  • Dimensions :  3  inches x 6 inches  x 7.2 inches.
Pros
  • Highly affordable
  • Easy to install
  • Requires no maintenance
  • Can last for 20 hours after full charge
Cons
  • The amperage output not so impressive.

How To Pick The ​right Lawn Tractor Battery

Riding lawn mowers feature electric starting. It is feature that makes it easier to start their larger engines unlike push lawn mowers which are pull-started. Just like in the automobiles, it is this riding lawn mower battery that makes it possible for the mower to start.

If the battery is put to proper use and maintenance, it might last for over 3 years. It will even last longer in warmer climates. But, at sometime, the battery will corrode or sulfate an as result, the output will gradually reduce over time. As a result, the ability to keep charge and start the mower will be reduced as well.That means the battery needs to be replaced.

Selecting the ​perfect riding lawn mower battery is a tough decision. There are many models to choose from in the market today. Choosing the one that works perfectly can be a little daunting and overwhelming. But the trick always lies in narrowing down to the specific requirements of the lawn tractor and the lawn itself.

Here are some of the factors that need to be considered before purchasing a new battery:

  • The position of the terminal

The terminal position is important when it comes to installation of the battery to the lawn mower tractors electrical system.  For example, group U1L riding mower batteries have their positive terminal on top of the battery, near the left corner. On the other hand, group U1R batteries have their positive terminals located near the right corner.

Installing U1R battery in a riding lawn mower that requires a U1L battery may not work. The cables might not reach the terminals. Besides, stretching the cables could result into chafed insulation. As a result, it might cause a dangerous short-circuit problem. Go for a battery that only fits into the requirement of your mower.

  • Cranking Amps

All engines are not the same. The larger the engine, the harder it is to turn it. That makes the output of the battery another very critical factor you need to consider when selecting the battery.

The riding  mower battery output is measured in CCA (cold-cranking amps). This measure describes the output (current) the battery can deliver in 30 seconds at temperatures of 0 degrees.

Choosing a battery with the optimum CCA will do the trick. Otherwise a lower CCA output may not start the engine at all. Ad, if it succeeds at starting the battery, the power sucked by the equipment will overtax the batteries own construction. As a result, it will wear it out faster. To keep the machine running effectively, the user need to choose a battery with the proper power rating you’re your lawn mower.

  • The type of garden/lawn

The type and size of garden will affect the choice of the lawn battery. Typically, most riding mower batteries can only service a lawn that is the size of the tennis court.

Since the battery lasts between 20-30 minutes between charges, anything larger than a tennis court might not work unless there is a spare battery that would be swapped out mid-way through cutting the grass.

Again, it is ideal in areas where it would not have to deal with taller grass or much undulation in the reduce the efficiency of the battery but also reduce the battery average life span.

The type of the garden determines the output of the battery that needs to be purchased. It also determines whether or not the mower would need a spare battery.

  • Types of battery

There are different types of batteries that can be used on lawn mowers. There are those that prefer lead-acid batteries. But most of the time, the battle is always between Lithium-Ion and Nickel-Cadmium batteries. All of these types have their strong points and their areas of weakness especially when it comes to longevity and the power output.

For example, NiCd batteries are cheaper option but can also handle strenuous conditions without failing. The only challenge with these kind of batteries is that they need to be fully discharged before recharging. If they  are not fully discharged, they lose their powered density and that won’t reduce the amount of time they can hold power. On the other hand, Li-Ion batteries usually have very higher power density and a higher power output. Besides, these batteries have little maintenance needs.

Unfortunately, such a lawn tractor battery charge capacity deteriorates after a few years of use. The choice of the batteries will depend on the specific needs and the user preferences for power out.

​lawn Tractor Battery : Frequently Asked Questions(FAQs)

  • How long should my lawn tractor battery last?

Just like any other equipment, batteries need to be protected from adverse weather conditions like winter and extreme temperatures (especially where are incidences of fire).  The average life of the riding lawn mower battery that has been taken care of well is three about three years.

  • Are riding lawn mower batteries 6 or 12 volt?

Old land mower models – especially those manufactured before 1980 – are powered by 6-volt batteries. But, modern mowers use 12 volt garden tractor battery

  • How to prevent riding lawn mower  battery from damage while charging?

If batteries are not properly charged, they can be damaged. The trick is, you need to use a battery that matches the voltage of your battery. The most preferred chargers are those that output about 10 amps or less. Any charger that surpasses that output can damage your battery.

  • How do to check a lawn mower battery?

In most of the times, the battery is always located  under the seat of your riding lawn mower. To access the battery, lift the  seat. Then using a digital multimeter turned on and switched to “A” or “DC” most,  the voltage of the battery can be tested.

suspension seat for zero turn mower reviews.

Final verdict

While these batteries are awesome in performance, The  Mighty Max ML35-12 SLA Battery takes the crown as the best lawn tractor battery. It is basically a rechargeable, maintenance-free battery. Besides, the SLA and AGM technology ensures that the battery stays spill-proof and leak-proof. As a result, it can mounted on any position, offer high performance and longer service.

​Also read

How to Hide Sprinkler Valves Using Decorative Sprinkler Valve Covers?

https://growtheherbs.com/garden-tools/

How to hide sprinkler valves using decorative sprinkler valve covers

​4 best sprinkler valve cover rocks

utility box cover landscaping

Sprinkler valves are an essential piece in a backyard for adequate watering of the grass around the lawn.

But sprinkler valves all over the yard are not a pretty sight to behold.  That is where decorative sprinkler valve covers come in.

You can make your own cover for them, just a simple DIY thing. A little box with a lid is enough to hide the valves on your yard or you can purchase the professional made, beautiful and well-tested sprinkler valves cover.

Top 4 decorative sprinkler valves cover reviews

  • 1. EMSCO Group Landscape Rock

  • The rock’s natural texture and appearance blend so well with gardens, lawns, and landscapes. Although it is an artificial rock, it is able to withstand extreme weather conditions.

    This rock’s natural color blends pretty well with the surrounding. It is light and easy to move around but it is equally durable. It is also easy to install.

    This fake rock cover will amaze you with its realistic look. It comes with two stakes which are used to securely and easily anchor the product to the ground.

    The rocks, made of polyethylene-blend plastic are not only strong, but they are also weatherproof and wind resistant. The material is also easy to drill and so you will not get any challenges if you want to insert a hose or wires.

            PROS

    • check
      ​It is easy to install
    • check
      ​It easily blends with the surrounding
    • check
      ​It is versatile. it can be Used to hide other utility boxes, not just sprinkler valves
    • ​It is lightweight and thus easy to move around

              CONS

    • ​It only comes with a 5-year warranty and in case of defects thereafter you will have to take care of the bills.
  • 2. Outdoor essentials faux rock, tan, jumbo

  • Just like the natural rocks, outdoor essentials faux rocks are irregularly shaped making them appear natural whenever they are placed.

    You simply need to measure the length, height, and width of the place you intend to cover and check for listed rock with larger dimensions than your object or location.

    Due to their curvilinear shape, these rocks are resistant to wind.

    They are hand painted and this makes every rock to be unique just like the natural rocks. The UV-resistant finish enhances the rocks’ natural look for the longest time possible.

            PROS

    • check
      ​They are strong and durable
    • check
      ​They are made up of drillable walls.
    • check
      ​They are easy to install

              CONS

    • ​Every rock is unique and so if you intend to group them together for sameness, the results might disappoint you.
  • 3. Dekorra products boulder rock

  • If you want to give your compound a natural look, dekorra products boulder rock is a perfect choice.

    It perfectly blends well with nature and surroundings.

    It is UV-protected and it makes it not to fade in the sun or even crack due to the harshness of the cold weather.

    It is also a nice way to protect your devices from any form of vandalism or extreme weather conditions. In case of a home compound, children are safe from any injuries.

            PROS

    • check
      ​Perfectly hides the pipes up to 24’’ high, small pumping systems and back-flow assemblies
    • check
      ​It is lightweight though it easy to move around.

              CONS

    • ​The colors of the rocks vary a bit from one rock to the other
  • 4. Backyard x-scapes artificial boulder small

  • It is durable since it is acrylic painted making it to be weather resistant. You can easily install and fit it by burying it in soil or simply placing it on a soft substrate.

    Another option would be placing it above the ground on natural or artificial turf. You will not even need fasteners to do all these.

            PROS

    • check
      ​Comes in multiple sizes from interior and exterior applications
    • check
      ​Easy to transport due to their lightweight feature

              CONS

    • ​If you want to cover a large area, it might not serve you well due to its small size.

    ​Sprinkler valves covers buying guide

    It is important to know the benefits of these sprinkler valves covers even before you purchase them so as to be sure with what you want.

    The main things to consider before purchasing a good sprinkler system cover include;

    • Location

    It depends on where you want to place your fake rock. If you intend to cover a large area, then you should select the large size. The fake rock covers utility boxes are ideal if you want a natural appearance of your compound, be it in the backyard, flowerbeds or even on pathways.

    • Durability

    Since this is something that you expect to place it outdoors, then you should ensure that it can withstand the harsh weather conditions such as extreme cold or wind. If you live in a place with a lot of wings these rocks come with stakes which are used to securely fit it on the ground in a firm but natural way.

    • Pricing

    This is a very sensitive area. Every person deserves to have a feel of their money on any product they purchase. Sprinkler covers are not exempted either. When you buy the fake rocks to cover pipes you will have protected an extra cost of repair.

     They come in different pricing and you cannot fail to get the one that perfectly fits in your budget. There is also the option of a used sprinkler valve cover which can still serve your needs at a lower and affordable price.

    • Beautification

    If you are looking at beautifying your yard, then be sure not to go wrong with these awesome sprinkler rock covers. They come in different dimensions and this makes it easier for you to choose the perfect size.

    • Best Brands

    There are a number of well-known brands that sell the decorative sprinkler valve covers. The number one choice would be the EMSCO Group. Here you will find a wide range of them and this makes it easier for you to make a choice.

    The next one would be ORBIT. They also manufacture a variety of decorative valve covers. You can check with them and choose the one that best suits you.

    The last one on this list is the Outdoor Essentials. They have also manufactured a different variety of valve covers to ensure you do not fail to get your perfect choice.

    All you need to do is to check with them and choose the one that fits your needs and budget.

    Looking for an acorn rake ?.

    Decorative sprinkler valve covers FAQs

    Question: I live in a windy area and I’m concerned if the product will be blown away by the wind. Is it possible to secure the faux rock on the ground?

    Answer: The fake rock comes with a hole on each side and two metal stakes that are used to properly secure it to the ground.

    Question: Is it possible to cover a small stump with a fake rock?

    Answer: Yes, that is possible to cover. You should also consider planting some annuals round so as to give it a more natural and realistic look.

    Question: What happens if children play on top of the fake rock, will it break?

    Answer: Not much research done to find out the much weight it can hold. However, children and even adults have sat on and even jumped on it and no cases of breakage have been reported.

    The bottom line

    The decorative sprinkler valve covers are the way to go when it comes hiding sprinkler valves.

    Check out our top 5 ​ insect killers for lawns and safe for pets treatments.

    best lawn care methods

    All about lawn care

    ​​Lawn care for beginners tips
    – 55 Frequently asked questions

    ​ You asked, we listened and we answered.  All those questions about your lawn that you need answered in one (long) very well elaborated article.

    Quick Navigation

    Q1: How Long Does It Take To Charge A Lawn Mower Battery?

    ​Some mowers use the standard 6-volt batteries but riding mower uses the higher 12-volt battery (you can confirm from the label) and will take anything from 4 to 8 hours to charge on the recommended “trickle charge” setting.

    Most chargers also feature a “fast charge” setting that takes less time but which exposes the battery to the risk of damage or explosion.

    For efficient charging, you should always stick to the correct amperage for the battery charger as specified in the manual.

    Having said that, always allow enough amount of time to adequately charge the battery.

    Then, always charge your mower’s battery before storing the mower for winter and before recalling it to duty.

    Q2 : How Many Calories Do You Burn Mowing The Lawn

    Push mowers are more beneficial than power mowers in burning fat.

    Push mowers are more beneficial than power mowers in burning fat.

    If you lawn mow for a half hour using a manual mower, you will burn 114 calories if you weigh 125 lbs., 138 calories if you are 150 lbs. and 156 calories if you are 175 lbs.

    A power mower will burn 102 burn calories in a half-hour job if you weigh 125 lbs., 123 calories for a 150 lbs. person, and 141 calories if you are175 lbs.

    According to calories calculators, a more intensive push-mowing task for 60 minutes can burn between 280 to 446 calories depending on your weight.

    Q3: What Does Lime Do For Your Lawn/ How To Apply Lime To Your Lawn?

    ​Lime improves your soil’s pH to make it a better nutrients’ absorber and improves grass growth in notoriously poor nutrients absorbing acidic soils (where pH is below 5.5).

    In addition to altering soil’s acidity, applying lime adds to the soil calcium and magnesium, two essential nutrients for healthier plant growth.

    The best time to lime your lawns is generally in fall or spring.  In fall, lime tends to break down much quicker thanks to the conducive weather cycles.

    It’s also important to note that lime can take a couple of months to break down so don’t expect to see a lush green grass overnight.

    Conducting soil tests will help determine the current pH and the necessary amount of limestone.

    When applying the lime, first aerate your lawn to open up the space that the lime will use to move into the acidic soil. You can use a core plug aerator.

    Next, apply the lime using a rotary spreader or a drop to your lawn. To ensure proper coverage, apply half of the required amount while walking in one direction then the other half while coming in the reverse direction.

    Q4: How Much Oil Does A Lawn Mower Take?

    Most standard push lawn mowers will take 2/3 to 3/4 quarts of oil to maintain optimum performance.

    Riding lawn mowers will, however, take substantially more depending on the brand and engine capacity.

    It’s also clear that bigger engines generally requiring more oil. For example, a 19 HP engine may need slightly above 1.5 quarts while a 26 horsepower engine may need about 2 quarts of oil to fill.

    The best way is to refer to the mower’s manual for the manufacturer’s recommendations on the correct oil amount. 

    Q5: How Often Should I Water My Lawn With Sprinkler System?

    Water 2-3 times per week. This ordinarily gives better results and will allow your lawn to dry out partially between next watering, leading to a healthier growth.

    On average, your lawn needs a minimum 1-1.5 inches of water weekly –though some turf varieties need watering year round.

    You can reduce the frequency of watering during the rainy season provided the rain is enough to maintain optimum growth.

    Conversely, you may have to water more frequently during a drought.
    To test if you are watering enough, stick a 6-inches screwdriver in the irrigated soil.

    If it goes in easily, you are doing well. If not, increase your watering frequency.

    Check out our ​recommended lawn sprinkler for low water pressure and decorative sprinkler valve covers.

    ​Q6:How Often Should You Mow Your Lawn?

    ​This will vary year to year and also depend on how fast the turf-grass grows and the season.

    Where you live, watering, lawn care maintenance, and proper application of fertilizer are some of the other factors influencing growth and subsequently, the mowing schedule.

    Your personal judgment and taste will also come in. Some lawn owners like it short and sweet yet others find longer grass delightful.

    Lawn experts have, on their side, suggested the ideal length to be around 2-3-inches for all types of grass so you should generally cut it if it’s beyond this size.

    That being said, both undercutting and overcutting are considered bad practices so you need to get the right balance.

    Q7: How To Change/ Balance A Lawn Mower Blade

    To be on top of things, change or file your mower’s blade regularly. And while you can file without removing it, it’s much easier to sharpen a blade when out.

    Here is how I remove the blade:

    • Disconnect the spark plug wiring and tie it back to avoid it flopping back to contact the plug (which can accidentally start the mower).
    • Now turn your mower on the side so the air filter will face up to ensure that oil will not saturate the filter.
    • Next, secure the blade by wedging a 2×4 (make it short) between the blade and the deck. Then loosen the fasteners anchoring the blade with a wrench.
    • Now turn counterclockwise and remove the blade (mark the side facing up).
    • Grab a file or a bench grinder and sharpen it.

    He is how to balance the blade:

    • Place it on a balancing tool (or a nail) and watch the heavier end drop. Now grind off material from the heavier end until your blade hangs level.
    • Finally, install/re-install the blade and tighten it because a loose blade can affect the engine’s operation.
    • Flip your mower back upright and reset everything.

    Tip: To prevent a messy fuel spill, you can siphon out the gas before everything else.

    ​You can also invest in a good blade balancer.

    Q8. How To Change A Lawn Mower Tire

    Changing a lawn mower tire isn’t as taxing or time consuming as many people think.

    Steps:

    • Park the mower on an even, flat surface and engage the parking brake to prevent it from rolling.
    • Then, using a floor jack, placed on the mower’s frame raise the wheel you are changing off the ground. Once it’s secured, slide your jack stands under to hold it safely in place.
    • Next, remove the tire’s debris cap before taking your pliers to remove the axle pin. You then slide the wheel slowly off the axle.
    • Now let the air out by pressing the valve down and holding till all the air is out. You can also deflate it by unscrewing the valve core using a cheap valve stem tool.
    • By now, the tire is ready to come out. Lubricate the contact point between the tire and rim by applying a generous amount of soap and water mixture.
    • Using two large screwdrivers, work around the tire prying carefully underneath while trying to get the rim out. Apply more solution around the other side and make your way round using the screwdrivers until your tire slips off. At this stage, apply some soap and water and clean the rim.
    • This is the time to install your new tire. Pick your brush and again apply an ample mixture of water and dish soap around the center part of your new tire.

    Try to slide the rim into your new tire, prying the tire open as appropriate with the screwdrivers until the rim fits. Keep applying more solution until you get your way.

    • Once the tire has fitted, reinstall the valve and inflate the tire to the recommended PSI range.

    Now replace the tire onto its axle then the pin/clip and lastly the debris cap.

    • Finally lower and remove the jack.

    Q9. How To Change A Spark Plug In A Lawn Mower

    But for a few commercial grade and large mowers, it’s pretty easy to change a spark plug and service lawn mowers.

    Here are the steps:

    • With the mower parked on level ground, remove (if applicable) the engine cover/heat shield.
    • Disconnect the connecting wire from the spark plug and tie/tape it on one aside to prevent accidental starting.
    • Fit and turn a spark plug socket counterclockwise over the plug until the plug comes out.
    • In case of difficulties, spray the spark plug with a quality penetrating lubricant and let it soak for about 10 minutes before retrying. It should eventually give in.
    • The new plug should then be threaded into the empty hole and turned, first by hand, then the plug socket until it stops turning.
    • Reconnect the usual spark plug wire and replace the cover (if applicable).

    Q10. How To Change Oil In Lawn Mower  

    Lawn mowers engines, like car engines, need regular oil changeover to increase the lifespan.

    Here is how to change oil in lawn mowers:

    • Park the mower on flat ground. You may put some newspapers (or other materials) below it to catch oil spillovers.
    • Since warm oil is easier to remove, run your lawn mower for about a minute (maximum two) to heat the oil up a bit before turning it off.
    • Disconnect the connecting wire from the spark plug and tie/tape it on one aside to prevent accidental starting.
    • Clean the area surrounding the oil tank of any debris.
    • Prop up your mower – the spark plug will be facing up- and place a drain pan under the mower. Locate the mower’s oil plug bolt and loosen it with a socket wrench.
    • Turn the oil plug counterclockwise until you see oil start to drain from the engine into the pan. Wipe the area sparkling clean (with paper towels) once all the oil has drained. You can also remove the dipstick and tip the mower the dipstick tube drains fully. The oil filter should be facing up while using this method to prevent oil from flowing into the carburetor.  You can even use a pump to siphon the oil if everything else fails.
    • Now turn the oil plug bolt clockwise to tighten it then remove the drain pan from below there.
    • Lower the lawn mower back to the wheels and remove the dipstick. You can now add oil as per the user manual recommendations before replacing the dipstick.
    • Tip: Consider replacing the old filter with each oil change as an old filter tarnishes the new oil inhibiting performance.

    Q11. How To Clean A Lawn Mower

    Cleaning is an important part of maintaining your mower on a tip-top condition.  

    Follow the following steps to clean your lawn mower:

    • Empty the gas and disconnect your mower’s spark plug wire.
    • Stand the mower on its side.
    • Attack the grass clippings on the underside by blasting using a garden hose. To loosen the stubborn dirt and grass clippings, spray the underside deck with cooking spray or silicone lubricant. A gas scrapper or putty knife may help you conquer the caked-on stuff.
    • To shine the engine area, blast with a powerful compressed air hose.
    • Scrub off remaining debris everywhere else using soap, hot water, and a brush.
    • Reconnect the spark plug, refuel, and start the mower. It’s advisable to have it run for some time before shutting it.

    Q12. How To Dethatch A Lawn With A Mower Attachment

    While there are other ways of dethatching your lawn, using the small dethatching blades typically sold as lawn mower attachments remains one of the best methods.

    Here is how to remove thatch from your lawn:

    With the spark plug wire disconnected, tilt the lawn mower sideways.

    Locate the spindle bolt that holds the old blade under the mowing deck.

    Wedge a wooden block between the old blade and the deck to prevent the blade from moving or turning. Now wrench out the spindle bolt using a socket wrench.

    Set the mower’s old blade aside and fix the dethatching blade – tines or springs facing down- on the spindle.

    Fasten the spindle bolt to secure the dethatching blade.

    Reinstall the spark plug wire.

    Now set mower’s deck height highest possible and start mowing the yard in normal movements. The springs/tines will remove the nasty thatch as you ‘mow’.

    ‘Mow’ to satisfaction then follow the previous steps in reverse to reinstall the normal blade.

    Rake up and clear the excess that you have removed.

    Remove the ‘dethatcher’ and put the normal blade.

    Q13. How To Dispose Of Lawn Mower

    A time comes when you and your old servant have to, sadly, part ways.

    Now, you have several options to dispose of your old lawn mower:

    Put It Up For Sale

    You can decide to make one last kill from it by selling it. You post advertisements locally. Don’t forget to include details such as the engine size, year of manufacture, mower type and model, and deck width.

    You can also share the ad online and local classifieds.

    Scrap It

    If you find the selling process laborious, you can call scrap waste dealers to pick up your mower. It may not fetch a lot but you are saved the hassle of looking for buyers.

    Dismantle It For Parts

    If the replacement is similar to your current model, you may want to keep it for parts. You break it down and select what you need. The rest can be disposed of through the local channels.

    Give it To A  Charitable Cause

    You can also extend a helping hand to the neighboring trade school, charity or educational facility by donating the mower to them.

    You can also give it away to one of the numerous online giveaway platforms.

    Recycle It

    Recycling is another smart option especially because it will cost you almost nothing.

    Empty the oil and gas into an approved container then talk to a recycling agency and find out how else to prepare the mower prior to dropping it off.

    Q14. How To Drain Gas From Lawn Mower

    You should always drain the gas from the mower before storing it for the off season or when you feel that the gas quality has deteriorated and needs a fresh refill.

    Here is how to drain gas from your lawn mower:

    1: Set the mower safely on raised ground. Some people use a set of saw horses or cinder blocks. This gives easy access to the underside. You can spread a tarpaulin under the mower to collect the spills.

    2: Disconnect the connecting wire from the spark plug.

    3:  Attached to the carburetor is the fuel line which runs all the way from the mower’s gas tank. Detach it, place a collecting can underneath the tank and let the gas drain freely into the container. You can also siphon the fuel with a hand pump.

    4:   Next, turn to the carburetor and locate the drainage bolt typically on the floor of its float “bowl”. Remove the bolt and allow the fuel to drain from the float tank.

    5:  Now remove the entire carburetor and clean it. You can spray an aerosol carburetor cleaner on all its accessible parts for a better wash. Reinstall the carburetor.

    6: Clean the gas tank now by adding some fresh gas (not water as it poses danger to injectors and carburetors) and sloshing it around in the tank. Thoroughly drain the added ‘cleaning’ gas into the can and wipe the tank dry using rags.

    7: Reconnect the fuel line on both sides and the spark plug.

    8: If you will be using it, fill up the tank and start it.

    Tip:

    You may take advantage of the process to also inspect and clean or replace the air filter as necessary.

    Q15. How To Edge A Lawn

    Edging a lawn gives it a professional look and makes it the talk of the neighborhood.

    Start by marking out a straight path on the edges clearly and prominently.

    Option 1: Edging Using a Powered Edger

    1: Start your power edger and starting at an end, walk forward slowly along the defined path while tightly controlling the edger to cut neatly.

    2: For a precise edge, keep the edger level and at the same position throughout. Also, focus on moving your body but never your arms. Additionally, movement should be slow and deliberate.

    3: If possible, avoid stepping on the grass all the way to the end.

    4: Review the line and perfect it where necessary.  

    Option 2: Edging Using a manual edger (half-moon)- best for non-straight lines

    1: Pick up the half-moon and standing at the first end of the area to be edged, align the round edge of the half-moon with the line.

    2: Next, tilt its handle back about 45 degrees.

    3: Now place one foot on top of the edger and push it down until the round edge has sunk 2-3 inches in the turf.

    4:  Rock the edger sideways and forward/backward to loosen the soil and attain a good cut.

    5: Repeat this to the end and again in reverse coming back from the other way.

    6: Finally remove the turf with a straight-edged shovel.

    7: Review the line and perfect it where necessary. 

    Q15. How To Fix A Lawn Full Of Weeds

    If you are losing your lawn to infectious weed, here is what to do:

    1: Mow the lawn. Ensure the blade is at a high setting.

    2: Spray a weed killer directly with a sprayer. Follow dosing instructions to avoid hurting the grass.

    3: Aerate the lawn using a tuff/grass aerator. To reach deeper roots, start aerating from one end to the other working first, moving horizontally.  Then, aerate across diagonally (starting at one corner and ending in the opposite corner of the lawn)

     4: Sow grass seed and add a pre-emergent weed herbicide as per the manufacturer’s usage instructions. Then mist your lawn (don’t saturate), preferably using a garden hose.

    5: After the lawn dries up, spread weed-killing fertilizer over the entire lawn grass.

    6: Water regularly and appropriately

    Q15. How To Fix A Smoking Lawn Mower

    Smoke is bad for all engines and your lawn mower isn’t spared. Smoking may mean it needs a bit more of care and not necessarily a broken mower.

    Here are the tests and what to do is its billowing smoke:

    Color of the smoke

    Possible reasons

    Meaning

    What to do

    white / blue

    *Oil has leaked into the engine- likely when tilting the mower to its side.

    This is completely harmless

    restarting the mower then allow the leaked oil to burn

    white / blue

    *The oil chamber is exceedingly full.

    Avoid  overfilling by checking the dipstick when refilling the oil

    Persistent White/blue (even after trying everything else)

    *A possible air leakage in its crankshaft

    OR

    * Some engine’s components and/or seals need replacement. For example the head gasket, crankshaft vent, or piston ring.

    You are in serious trouble

    Take it to a professional

    Black

    *carburetor isn’t getting sufficient air

    #The engine is “running rich”

    replace the air filter

    adjust the filter if the problem persists

    Take it to a professional

    Continued black smoke (after filter replacement and adjustment)

    * This could be a critical mechanical issue.

    There’s a lot of trouble ahead

    Take it to a professional

    Any other strange looking smoke

    *Could mean anything

    The mower may be having problems

    Take it to a professional

    Q16. How To Fix Dog Urine Spots On Lawn

    Aaaaah, dog urine spots on the grass are an ugly eyesore and make all your efforts seems to be in vain.

    Here is how to fix dog urine spots on lawn:

    1: Rake the affected area thoroughly to remove the dead or browned grass.

    2: Apply extra-fine ground limestone (one layer) then water the spot heavily to boost limestone absorption. Wait for a week.

    3: Dress that area with top soil or compost before sprinkling grass seeds through the affected area.

    4: With your garden hose, gently water the freshly seeded area to avoid washing the seeds away.

    5: Water daily, or as necessary, for a couple of weeks. The spot will soon go back to a healthy green!

    Q17. How To Fix Brown Patch In Lawn

    Brownish color could be the clearest sign yet that your lawn could be plagued by fungal disease. It could also mean that some nasty insects are hard at work doing damage or that your dog has been visiting (and peeing).

    Here is what to do:

    1: Rake the brown spots vigorously, removing dead grass. Collect and dispose of the dead matter.

    2: Aerate the soil

    3: Cover the area with the right mixture of top soil and grass seeds. The seeds should be the same variety currently planted in the lawn. The grass seeds’ package has guidelines on the correct amount of seeds.

    4: Scatter the right amount of root-stimulating fertilizer over the entire area. The amount should be as indicated on the fertilizer package for the total area to be treated.

     5: Water every spot daily for at least two weeks unless it rains. You can reduce the frequency later to about twice a week.

    Tips:

    • Mulching the patched area slows evaporation, improves germination, and discourages seed washouts so consider it. A layer of chopped leaves or straw would offer enough cover.
    • Creating a simple string perimeter around the area under repair helps keep children and pedestrians away.

    Q18. How To Get Rid Of Ants In Lawn

    Ants are downright stubborn and some of the most difficult menaces to rid from your lawn.

    But you can conquer them and it’s good that you have several options.

    Here is how:

    Option 1: Prepare a mix of liquid dish soap, water, and canola oil. The measurements should be 1/2 teaspoon, 1 quart, and 1 1/2 tablespoons respectively. Add them in a mixing bowl and with a whisk, blend the ingredients to perfection.

    Then add the solution into a spray bottle, shake it well, and go around your lawn spraying the spots with high ant concentrations. Also pour some into their nests directly. They will suffocate to death.

    Option 2: Apply diatomaceous earth in the entire yard. Target spots with high ant concentration and ant nests and be generous. The earth kills by suffocating and drying out the ants’ body moisture.

    Option 3: Prepare a mix of liquid dish soap, cayenne pepper sauce, and water. The measurements should be 1/2 teaspoon, 3 tablespoons, and 1 quart respectively. With a whisk, mix well in a mixing bowl and then transfer it into a spray bottle.

    Visit the lawn spraying the ants and pouring some more into their nests.The mixture smothers and burns tons of the insects.

    Option 4: Pour white distilled vinegar (about 1 quart) into the ants’ nests. This causes acidic conditions which are very fatal to ants.

    Option 5: Choose one of these ​top rated insect killers for lawns and safe for pets

    Q19. How To Get Rid Of Moss In Lawn

    For purists, moss is yet another unwelcome eyesore and the sooner it’s gone from the yard, the better for everyone. We also know that moss go as far as attempting to replace your turf grass!

    So, how do you get rid of moss from the lawn?

    Option 1: Grab the best spring-tine rake at your disposal and rake the affected zone vigorously.

    Option 2: If you are under a massive invasion, install your dethatching blade and get on the mower.

    Be sure to set the mower’s height properly so the tines will only strip the moss away (and not the grass).

    In most cases, you have to make several passes to completely exterminate the moss.

    Option 3: Apply moss-killers especially those with ferrous sulfate on the infested area. As usual, follow the usage instructions. Allow the product time to work before raking up the dead moss. If you are a fan of organic products, try a mixture of water and baking soda or dish water in place of commercial herbicides.

    Final Step:

    Collect and dispose of the raked or dead moss from the lawn.

    Q20. How To Lay Sod Over Existing Lawn

    Sodding your lawn helps replace dying or struggling turf grass quickly and efficiently.

    The bit I like most is that you can lay sod over your existing lawn and save money plus time.

    Here is how:

    Phase A: Preparation

    1:  Start by cleaning the landscape. This requires that you collect all the possible lawn debris and pull the weeds by hand or with glyphosate. You can apply an herbicide to remaining weed.

    2: Cut current grass low. Here is why: Tall grass blocks the sod’s roots from reaching the ground potentially causing it to die.

    3: Now level up the surface by filling the holes and depressions with soil. Also, consider digging the lawn to help improve leveling. Tilling will also help the grass to decompose faster (and provide nutrients) after you lay the sod. 

    And while at it, you want the sod to be level not only with the ground but also with edges such as any driveways and walkways so maintain the line of sight.

    Phase B: Placing The Sod

    1: Place the sod at the end (of your lawn) you want to start from and start unrolling it, beginning from the furthest corner.

    2: Start another roll immediately where your previous roll finished even if some space will be left between the rolls. Of course, try to avoid walking over the freshly laid sod.

    3: Trim the edges of any excess sod immediately using a lawn edger.

    4: With a utility knife, cut out the sod that could be placed over obstructions such as irrigation heads on your lawn.

    5: Fill a lawn roller (halfway) with water and roll over the new sod with it to remove air pockets between the ground and the sod.

    Again roll row-by-row to ensure that you cover all the spots. This promotes contact with soil and can help the roots of the new sod to come to life more quickly.

    6: Water your sod daily to about 7 inches deep for the next 6 weeks to boost roots growth.

    Q21. How To Level A Lawn

    A level lawn looks easy on the eye and makes your maintenance work a whole lot easier.

    Here is how to level your lawn:

    • Mix sand and top soil in a wheelbarrow in equal parts.
    • Apply scoops of the mix to low laying areas using a shovel (don’t add more than ½ of the filler at a time)
    • Rake the fresh topdressing to smother it more evenly or use a broom.
    • Continue filling every other low spots until it looks perfect.
    • Water and fertilize the grass to promote uniform growth.
    • Keep an eye on the progress during the growing season and apply the mixture (Still ½ at a time) where necessary.

    Q22. How To Make A Lawn Mower Fast

    Here are some tweaks you can try to make your mower mow like a racer:

    Tweak 1: Sharpen The Mower Blades

    Blunt blades cut slowly and make it sluggish. Sharpen them and you may immediately notice quicker cutting. Also, clean the undercarriage.

    Tweak 2: Change The Pulley System (for belt-driven mowers)

    For belt-driven lawn mowers, altering the size of their pulley systems can speed it operations. You expand the size of both the pulley at the rear and the one attached to its engine. These are minor adjustments but can have an impressive impact.

    Tweak 3: Change The Gas & Ensure Its Running Full

    High-octane gasoline helps the engine to achieve maximum running efficiency which translates to easier and quicker cutting.

    Also, Adding a fuel stabilizer can help it will run more efficiently.

    Lastly, always check that it’s running at full tank and that the engine oil is at optimum.

    Tweak 4: Shorten the Spring

    Accessing the governor of the lawnmower and shortening the spring can help.

    If not, remove the aforementioned spring altogether. The latter works like a charm!

    Tweak 5: Check That Every Part Is In Top Condition

    Finally, confirm that every other component is in top-tip condition. The air filter, tires, shafts, chains, and everything.

    Q23. How To Overseed Lawn Without Aerating

    If you’re struggling with a thin lawn, you can try aerating.  

    More often than not, aeration brings an improved root system and enriched growth.

    An easier and less-time consuming alternative is overseeding -sowing new grass seeds into an already grown lawn.

    Here is how to overseed:

    1: Mow the existing turf to loosen the soil (cut it to be between 1- 2 inches tall).

    2: Rake and dethatch if necessary

    3: Apply the 10-10-10 (or any other starter) fertilizer.

    4: Spread the seeds. Use a spreader or hand (small areas).

    5: Water lightly and regularly (twice a day for 2 weeks). You can reduce watering frequency from the 3rd week as the seedlings get well established.

    Tip: the best time to overseed is during early fall or late summer as the temperature is-at this time-highly conducive to germination and growth.

    Q24. How To Plant Grass Seed On Existing Lawn

    Planting grass seed on an existing lawn breathes a fresh lease of life to an emaciated lawn.

    This is how:

    1: Mow grass to about 1-2 inches.

    2: Rake the top ½  inch of soil to loosen it. Collect the debris and remove dead grass. Use a walk-behind aerator if you have a big yard. Again consider dethatching if there’s overwhelming thatch.

    3: Apply a starter fertilizer such as 8-8-8 as per the manufacturer’s instructions using a rotary spreader.

    4: Fill a spreader (broadcast/drop) with grass seed. The rate per square feet should be as recommended in the re-seeding instructions on the grass seed packaging. Small areas can be seeded by hand.

    5: Water initially twice daily for 2 weeks to boost sprouting. You can reduce watering frequency from the 3rd week as the seedlings are now germinated and healthy.

    Q25. How To Prime A Lawn Mower Without Primer

    If your mower’s primer bulb is missing or broken, you can still start the mower by adopting a substitute priming method.

    Essentially, you will be adding starter gas manually to the bowl via the air intake hole:

    Steps:

    1: Remove the cover protecting the air filter by unsnapping small retaining clips (or in some cases by removing the screw).

    2: Remove the now visible air cleaner from its housing.

    3: Fetch and spray a reasonable amount of your regular fuel (using an eye dropper) through the air intake hole at the rear of the housing.

    4: Start the engine immediately via the electric starter or pull lord as the gas evaporates rapidly.

    5: If it doesn’t start, keep retrying. (You can squirt some more fuel after 6 failed attempts) 

    6: Eventually replace the filter correctly and the cover.

    Q26. How To Remove A Lawn Mower Blade

    You may need to remove the lawn mower’s blade to sharpen  or for replacement reasons.

    It’s fairly straightforward:

    1: Set the mower on its side.

    2: Disengage the spark plug.

    3: Wedge a wooden block between the blade and the mower’s deck to steady the blade.

    4: With a wrench, remove the fasteners on the blade. If they’re too tight, spray a lubricant and retry.

    5: Pull the blade plus the support off the crankshaft.

    Q27. How To Remove A Stuck Lawn Mower Wheel

    You can actually remove a stuck lawn mower wheel without injuring the rim.

    Steps:

    1: Jack the tire until it’s about 6 inches off the ground. Once you have confirmed that it’s safely supported with the jack stands, remove the wheel nuts.

    2: Spray a penetrating fluid generously where the rim meets the wheel axle. Be sure to spray both the front and the back of the rim.

    3: Now tap the rim around the axle’s circumference with a mallet (rubber mallets are preferred). Be sure to tap the front as well as the back of the rim.

    Let the penetrating fluid to sit for about 20 minutes.

    4: Grab the tire (the two sides) and with force (but not excessive), attempt to pull the wheel off the axle. To ease matters, use a rocking motion.

    5: If the tire is unmoved, grab the rubber mallet one more time and bang on the back/front of the rim before re-applying more penetrating oil.

    6: Using an emery cloth, remove any rust around the visible part of the axle while allowing the penetrative oil to work.

    7: Now grab the tire, again the two sides and re-attempt to pull the wheel from the axle.

    8: If you are not heading anywhere, ask a friend/colleague to tap the rim’s back side with the mallet while you simultaneously rock it off the axle.

    Q28. How To Sharpen Lawn Mower Blades With A Bench Grinder

    A bench grinder is a quicker and easier alternative lawn mower blade sharpening tool.

    Here are the similarly easy steps:

    Stage A: Remove the Blade

    1: Tip the mower on its side

    2: Disengage the spark plug

    3: Wedge a wooden block between the blade and the mower’s deck to steady the blade.

    4: With a wrench, remove the fasteners on the blade.

    5: Pull the blade off the crankshaft.

    Stage B: Sharpen the Blade

    1: Move the blade back and forth -against the wheel- so as restore the edge. Make a couple of light passes and ensure you sharpen both edges

    2: Balance the blade on a nail and grind the heavier side- if any- until it’s fully balanced.

    3: Reinstall the blade by following the previous steps in reverse.

    Q29. How To Sharpen Lawn Mower Blades Without Removing

    Sharpening the blades will make your mower to do a neat cutting job, quickly, and efficiently.

    So, is there a way to sharpen lawn mower blades without removing them?

    Sure, yes. And its quicker than removing.

    This is how:

    Steps:

    • Set the mower on its side
    • Disengage the spark plug.
    • You can now access the blade.
    • Grab a metal file and file the blade evenly ( flexible shaft angle grinders also work. )
    • Be sure not to over sharpen because of balance.

    Tip: doing this with the gas tank empty prevents a messy gas spill.

    Q30. How To Stop Tree Roots From Sprouting In Lawn

    Tree roots sprouting from your lawn are unsightly as well as being a general nuisance.

    Of course, it’s easier to prevent the sprouting rather than wait to battle the sprouts when it’s too late.

    Now, the easiest way to stop the roots sprouting into the lawn is by maintaining healthy tree growth. This is because most tree species grow suckers only when stressed. And so ensuring that the trees are accessing sufficient sunlight, nutrition, and adequate water is your first line of defense.

    Installing a proper root barrier (between the turf area and the tree) can also effectively curtail the unwanted trees sprouting.

    You can also apply quality growth inhibitors to the trees to control sprouting. However, if overused, these chemicals could end up killing the tree.

    Q31. How To Stripe A Lawn

    Stripping a lawn can give the mouthwatering patterns that leave everyone salivating.

    And Unlike what you may think, it’s so easy to mow your favorite stripes pattern since it’s simply a question of cutting the grass creatively in different directions.

    Steps:

    • First, mow the entire perimeter around your property. You need to keep it straight all through unless you are working on a wavy pattern.
    • Now add your first stripe to the lawn, ensuring that you are mowing at a right angle to the perimeter.
    • Then, mow in opposite directions throughout the remaining property.
    • Each time, try and overlap your previous stripe slightly to achieve a sleeker look.
    • Pass over the whole perimeter once more to remove any irregular stripe patterns.

    Tips:

    • To avoid turf damage, remember to lift your mower’s deck when turning (at the end of each row).
    • Use an equal overlap distance for every stripe to ensure equal width in your stripes.
    • To widen a stripe, go down it a second time (sticking to its original direction).
    • Setting the blade highest helps create darker stripes.
    • Attaching a lawn roller to the rear of your mower adds weight and makes grass to bend more easily.

    Q32. How To Top Dress Lawn

    At times, top dressing a lawn gives it a big league look. Top dressing also helps in evening the ground. Plus, it provides richer nutrients for growth.

    1. Core aerate the lawn first to make the soil more penetrable.
    2. Prepare the top-dressing:

    What you need…

    • Fine Loam or topsoil
    • Sand
    • Peat (or compost)

    The type of top-dressing to prepare depends on the soil.

    • If you have typical loamy soil, mix the 3 ingredients in equal proportions.
    • If you’re in a clay setting, mix sand and peat equally –ignore topsoil.
    • Sandy soil requires very minimal sand.

    Alternatively:

    Purchase high-quality bagged lawn soil or top-dressing mixture.

    • Applying the top dressing:

    Shovel out small mounds of top-dressing mixture onto the lawn.

    Spread it with the back of your heavy garden rake (or something flat) filling the aeration holes and covering the low spots.

    Keep spreading until the depth evens and grass peeks through.

    In the end, the top-dressing should be ½” or even less over your existing grass.

    • Water the top-dressed area generously. You can then allow the mixture to sit for one or two days before replanting grass in damaged spots.

    Q3​3. How To Use A Lawn Mower

    Using a lawnmower shouldn’t be an intimidating spectacle. Here is an easy guide:

    • Inspection:

    Check for leaking fluids (gas or oil) and the fuel level (Refill if it’s running low).  Also, confirm that your spark plug is correctly inserted and that it’s in top condition.

    • Prime it:

    To prime the engine is to squirt small amounts of gas into the carburetor and gives the mower optimal combustion reaction for an optimal run.

    • Start it:

    Yank the ripcord to ignite the mower. Remember to hold down the safety bar while pulling the cord and to set the choke to ‘off’.

    • Operating it:

    Now, Set the right cutting height (between 1 3/4 – 2 inches) depending on the grass type and begin mowing. Take breaks whenever mowing an expansive lawn and never abandon a running mower.

    Since slopes can be slippery; mow them side to side to reduce the risk.

    Note: If the mower had already warmed up, just pull the ripcord string safely to start it. Priming isn’t necessary.

    Q34. How To Winterize A Lawn Mower

    Starting a lawn mower after spring can be a daunting task. But if you properly prepare it for the cold season storage, it will come out in shape and ready to roar to life.

    Here is how to winterize your lawn mower:

    • Empty it:

    If you’ll be keeping it in the basement, have it run until it’s out of gas.  Or just follow the instructions on your owners’ manual to empty the gas tank.

    This protects carburetors and discourages corrosion of the engine parts.

    • Use a fuel stabilizer:

    If you’ll be leaving the mower in the garage, refill the fuel tank and add a gas stabilizer.

    This keeps the gasoline from disintegrating.  

    • Oil Changeover:

    Check and refill the oil to the designated marking on the dipstick. This helps preserve the engine.

    • Clean It:

    Scrape grass clippings and other debris from under the mower deck by spraying with a garden hose or using an old school bristled pot scrubber

    This prevents rusting.

    • Change The Plug:

    Inspect and change the spark plug if there are signs of corrosion. If it looks fine, add some oil to its crankcase and reinstall the plug.

    • Sharpening the Blades:

    You can also sharpen the blades now.

    Q35. Should I Aerate My Lawn?

    Aeration is a potentially vital part of lawn maintenance practices. It reduces soil compaction and will help air, water, and nutrients to reach the roots for lush growth.

    But should you ask when is the best time to aerate your lawn?

    The key is to check for soil compaction.

    Now, to probe the soil for compression, try to insert a compaction tester up to 36″ to 48″ deep. If it’s compacted, it will resist the penetration.

    Another approach is to dig out one square foot area of the lawn about 6 inches deep.

    You then check the grass roots. If they reach only 1-2 inches deep, your soil could be compacted.

    Then, when is the best time?

    The most recommended time to aerate the soil is during the growth season typically early spring/fall(for cool season grass) and late spring (for warm season grass).

    For efficiency, always perform a “core aeration,” with a plug aeration machine.

    For more on what aeration does to your lawn, check this article.

    Q36. What Kind Of Gas For Lawn Mower

    Using the wrong kind of gas for your lawn mower could sound the death knell for your engine. It may also void your warranty.

    So, what gas should you fill in your mower?

    Four-stroke engines will use high-quality unleaded gasoline (at least 87 octane rating).

    Two stroke engines still use this gasoline but need it to be mixed with high-grade two-cycle engine oil in the proportions indicated on the lid.

    In most case, the ratio  is 50:1 (fuel : oil) for higher revving mower engines.

    Q37. How to take care of Battery For Riding Lawn Mowers

    Riding lawn mowers are easier to start than traditional push mowers thanks to the installed batteries. Now, riding lawn mower batteries are mostly the standard lead-acid 12-volt designs but for a few mowers that use gel batteries (a variation of the lead-acid types).

    Lawnmower batteries usually die after sitting for a prolonged duration, after being shorted out, or being drained by too many attempts at turning the starter.

    However, proper usage and care for the battery will give you three to four years of service (even longer in some climates).

    Examples of care practices include ensuring it stays charged, cleaning corrosion off the terminals, monitoring and refilling the battery as necessary, fitting the right battery,  and checking that the terminals are never loose.

    Q38. what is the Best Hearing Protection For Lawn Mowing

    Lawn mowers do exceptional jobs on our lawns but unfortunately, almost all are quite loud.

    While it’s true that some models are less noisy, you will most certainly need some form of noise protection at some point.

    The best hearing protection for lawn mowing should, at the bare minimum, block out noise while allowing normal conversations, be comfortable to your ears, easily adjustable, and generally, well built.

    From my experience, the ProForSho Noise cancelling Earmuffs are outstanding. I have used them with my riding mowers and take it from me; these know how to silence mowers.

    They’re lightweight, feel good, and bring down noise to just about 34dB!

    Check out our reviews on the best hear protection for lawn mowing here.

     

    Q39.What is the Best Lawn Mower For Hills

    Hilly and winding yards are an amazing sight but can be costly to maintain.

    That’s because standard lawn mowers are wanting when we come to climbs and can even be unsafe in excessively hilly landscapes

    And so yard owners often have to spend on lawn mowers for hills- specially built mowers to cut on extreme slopes and challenging climbs. 

    Now, I know you would want the best trimmer but which tops them all?

    As you can see here, Honda’s 3-in-1 self-propelled gas hills mower is a favorite for many lawn owners.

    It packs incredible horsepower and is very talented climber dashing across yards at full speed.

    But the biggest attraction is the reassuring zone starting safety system which shuts the engine automatically if it slips from your control.

    That it uses less gas than competing lawn mowers is another huge bonus.

    Q​40. what is the Best Time Of Day To Mow Lawn

    While everyone agrees that cutting grass is a crucial part of owning a lawn, the question of the best time of the day to mow the lawn is a bit controversial.

    So, when should you cut the grass?

    Should you cut it early morning?

    The grass is wet from dew meaning your mower can easily clog up. This could hence be one of the worst hours to cut.

    Should you cut it mid-morning?

    The dew is gone and the sun welcoming. You and your mower will thus be safe and at home.

    It follows then that mid mornings could be the optimal mowing hours.

    Should you cut it mid-day?

    The grass is now completely dry and feels fine. But the sun is at its hottest and punishing.

    So, this hour is fine for the grass but punishing for you.

    Should you cut it afternoon?

    There is still less stress on the grass while the sun is slowly cooling off. It’s a much better cutting time than mid-hours.

    Should you cut it evening?

    For you, the evening is perfect.  Even the blades will find cutting still easy. However, the grass will not have recovered by night time meaning your lawn could be at risk of disease and fungi.

    Q41. How To Install Side Discharge On Lawn Mower

    Installing a side discharge chute enables you to mow taller grass without clogging the mower deck as it is often the case when mulching with typical lawn mowers.

    Installing a side discharge is very straightforward:

    • Locate and unsnap the side discharge cap (vent cap)
    • Reach into the designated bag and extend its metal width bars till they clasp open then hold the bag to the full width.
    • Now snap this bag on the chassis attachment notch or in the vent cap’s attachment notch (on the mower’s side)..
    • Hold open your discharge chute while simultaneously attaching the hooks into the discharge chute’s cover openings.
    • Gently tug on your discharge chute to confirm it’s firmly secured to the mower’s deck.

    Q42. How To Use A Snowblower On Gravel Driveway

    If you have the best snow blower for gravel driveway, beating back frost from your gravel driveway is going to be unbelievably easy.

    Check the steps:

    1: Clear the gravel driveway and the walkways – you don’t want the car there as it will give you additional work.

    2: If there the wind isn’t blowing, start from the center of your driveway ensuring the snow nozzle is all along pointing outwards towards the surrounding yard. In the meantime, you blow in circular motions moving outwards as you go.

    3: If you can feel the wind, the snow nozzle should be facing in the direction the wind is blowing. You then start in the extremely upward section of your driveway, blowing side to side. You also set the snow chute to discharge blown snow downwind.

    4: Shovel any snow left overs.

    Tips:

    If the snow is very deep, make two passes. First time, the snowblower will pass higher to remove the top layer. In the second pass, you blow lower to eliminate remaining snow.

    Q43. How To Get Rid Of Acorns In My Yard

    Oak trees have their goodness but dropping acorns on the lawn isn’t one of them.

    But you’re in luck because there are many ways of getting rid of acorns scattered in the yard.

    Here is how to eliminate the acorns menace:

    Method 1: Rake Them

    You can simply rake them up using the best rake for acorns.

    Method 2: Trap Them

    Spread tarps over the ground (around the oak tree trunk) and underneath the canopy;

    Grab the tree forcefully and shake it vigorously to stir acorns to tumble off the branches. You can also smack the branches, if necessary, with a stick. Wrap up the fallen acorns inside the tarps and dispose of them in the compost or appropriately.

    Method 3: Pick Them

    Push an acorn picker (nut roller) across the yard to pick up and toss the acorns into a waste collection basket.

    OR

    Attach a quality lawn sweeper to your lawn tractor and make several passes over the infested area.

    Method 4: Vacuum them

    Vacuum the acorns with either;

    • A wet-dry shop vacuum (with a hose attachment)
    • A leaf blower (models converting to a vacuum)
    • A lawn & leaf vacuum(hitch it to the lawn tractor)

    Q44. How To Get Rid Of Fleas Outside In Yard

    The family pet is a family favorite. But it’s also a darling of fleas. And so despite your best efforts, your pets are likely to carry fleas into the house.

    To permanently combat these blood sucking parasites, you have to wage war on them where they are hiding- your yard.

    Steps:

    Phase A: Cleaning the yard

    1: Rake the yard and remove all weeds and debris. Focus on spots where the insects hide such as flower beds, composting areas, and beneath bushes.

    2: Mow the lawn grass and clear the clippings.

    Phase B: Watering

    3: Water the yard generously 24 hours before scheduled time. This encourages flea pupae to hatch (making them easier to kill with insecticides) and drowns some adults as well as larvae.

    Phase C: Spraying

    Buy and spray a suitable flea killing insecticide with a hose. Use the recommended volume measurements and thoroughly treat heavily infested areas and zones frequented by your pet.

    Also, treat every other spot visited by pets simultaneously and give the pet a good flea bath using a vet-recommended insecticide.

    After Spraying:

    Your pets and everyone should stay away from the treated areas for between 4-6 hours

    Re-Spraying:

    Spray a fresh round of treatment after every 7-10 days perhaps up to 8 weeks.

    Tip: You can prevent re-infestation by mowing and raking your yard regularly.

    Q45. What Is The Best Gas Leaf Blower For The Money?

    When fall comes, the best gas leaf blower might be the easiest way out of the flood of leaves that will certainly inundate your yard.

    Personally,  I find the Troy-Bilt TB672 Wheeled Leaf Blower(Sweep- Best) amazing.

    It has stellar power and does a fantastic job sweeping and loosening not only leaves but also prickly seedpods as well as every other type of debris.

    What blew me away was the athletic 208cc engine, the 14-inch output impeller, and the 90-degree discharge chute (front) all which team up to dramatically cut blowing time by almost 3/4.

    It’s actually recommended as one of the best gas leaf blowers for short people or anyone who struggles with lugging a backpacking blower.

    Q46. How To Aerate Lawn By Hand

    Yard aeration is one of the most critical lawn maintenance tasks. And while it’s true that for large spaces you will need a powerful pull-behind plug aerator, it may not make economic sense investing in a costly aerating machine for small yards.

    Instead, you can still aerate effectively by using your hands.

    Here is how:

    With a hand aerator (should have ¼ – ½” diameters):

    A-Getting ready:

    Push the hand aerator tubes through the ground to see if they can reach a minimum of 4-inches deep.

    For the soil to be right, it should not stick to the tube ( if it does, it’s too wet). Similarly, it shouldn’t be powdery or resisting the push (if it does, it’s too dry.

    Wet soil conditions should improve within days so bid your time and retry. For dry conditions, water for 2-3 days then retry.

    B- Raking:

    When the soil is okay, you rake the heavily thatched areas and remove debris from the lawn.

    C- Aerating:

    Push the diameter tubes 4 inches (minimum) deep in the soil then pull it out to extract cores of soil which in turn makes aeration holes. Don’t move the cores from the lawn. 

    You will repeat every 4-6 inches for the entire area.

    When finished, rake the cores breaking them down throughout the lawn area.

    With a spading fork:

    Push it down around 4-inches and rock it back/forth to loosen the soil. You will repeat every 4-6 inches for the entire area.

    Q47. How To Soften The Ride Of A Zero Turn Mower

    A rough-riding zero turn mower is bad for your back and is generally disconcerting to mow with.

    But you can tweak it and make it comfier to ride even on rough terrain.

    Here is how:

    • Get a great suspension seat: a very cushy seat coupled with a superb seat suspension help soak up bumps. Arm rests should help you remain in position if it goes crazy.
    • Change to smooth tires: Smooth tires let your mower to navigate sharper turns easily because of reduced friction between your mower and the grass-thanks to the absence of tread.
    • Check tire pressure: Try lowering the tire pressure –both rear and front appropriately as recommended in the user manual.

    Q48. Do Robotic Lawn Mowers Work?

    Since making their entry into the mowers’ market, a lot of lawn owners have been wondering if robotic lawn mowers work.

    And the answer is a big yes. It’s true some resemble tiny racing cars but robotic lawn mowers can cut every blade of grass to your preferred height.

    The units come with rechargeable batteries (lead-acid, nickel cadmium, or lithium-ion) and a charging station.

    You plug the charging center to an accessible outdoor outlet. Now, the robot will automatically return to the charging base when it goes low on battery and self-charge.

    While they may not mow in the usual immaculate straight lines as conventional mowers, they consume less energy than gas-powered models, and crucially, never release harmful emissions.

    You can even schedule it to mow at your most convenient time while monitoring it from your phone.

    Q49. Should You Bag Grass Clippings?

    The debate on whether to mulch or bag grass clippings isn’t going to go away soon.

    But which is smarter? Bagging or mulching?

    That many states have banned bagging is enough sign that the bag is an ill-advised move. This is why:

    Bagging just adds more waste to our landfills which eventually harms the environment.

    In any case, mulch becomes a natural fertilizer and will make your lawn grow lush and richer in addition to saving some of the money you could have spent buying nitrogen fertilizer.

    Perhaps you may bag some grass clippings when the grass is extremely tall but even then, the best way is to add them to the composite pile.

    Q50. What Is A Brushless Lawn Mower?

    Brushless lawn mowers are slowly carving a niche for themselves in the lawn mowers’ market.

    But what is a brushless lawn mower?

    Now, a brushless lawn mower is simply a mower flaunting a brushless motor.

    On the other hand, conventional mowers spot brush motors. So what the difference?

    The traditional model has carbon brushes, an armature, a commutator, and magnetic rings while the increasingly famous brushless motor doesn’t include the commutator and brushes.

    Instead, they have a small circuit board coordinating energy delivery during ignition.

    Additionally, the windings and magnets locations are reversed.

    Because of this design , the motor auto adjusts according to how tough a task is with tougher cutting jobs drawing more power and vice versa.

    This improves battery life and leads to a more intelligent and efficient cut.

    The absence of carbon braches also translates into reduced maintenance and longer engine life.

    Conversely, a regular brushed motor maxes out on the speed you have set it to and runs less efficiently.

    Q51. How To Get Rid Of Clover In Your Lawn

    Clover is a reliable supplier of natural nitrogen but isn’t the best looking addition to your lawn grass and can easily take over the yard.

    Here is how to get rid of clover:

    Chemical methods…
    • Use fertilizer:

    Look for a nitrogen-rich fertilizer and spray on the clover directly following the recommendations on the label. Clover struggles in a nitrogen-rich environment and should die off.

    • Use ammonia:

    Apply ammonia (made for lawns) directly on the clover until it succumbs. 

    • Use herbicides:

    Get one of the herbicides with Dicamba and 4-Dichlorophenoxyacetic acid as one of the ingredients and apply to the clover directly. These are good clover killers.

    Natural methods…
    • Mix vinegar and soap and spray the clover. Recommended quantities are 1 tablespoon each of dish soap and white vinegar into a 34 cup of water.
    • Sprinkle powdered corn gluten onto the clover. Water the powder after application and leave the area to dry for 2-3 days for efficiency. Follow instructions on the packaging for re-application.
    • Suffocate clover by covering it with a garbage bag or plastic tarps. It dies within a couple of weeks.
    Other methods:
    • Manually fork out the clover by a hand fork.
    • Fertilize the lawn with a nitrogen-rich fertilizer every spring.
    • Mow at a higher setting (3 to 3.5 inches)for the grass to outgrow the clover.
    • Keep the lawn hydrated.

    Q52. How To Get Rid Of Mushrooms In Lawn

    Mushrooms are a nuisance and can frustrate your efforts to have a flawless lawn.

    So, how can you get rid of mushrooms?

    Here is how:

    • Prepare a water-Vinegar mixture in a bucket and spray on a day when the temperature is above 60 degrees but less than 85 degrees Fahrenheit. The mix should be four parts is to one (water: vinegar). Wait 3-4 days for the mixture to annihilate invasive mushroom.
    Other techniques…
    • Reduce your watering frequency as mushrooms grow well in damp conditions.
    • Dethatching, replacing old mulch, and raking destroys disturbs decayed matter which promotes mushrooms growth.
    • Pick the mushroom as soon as you sight it to discourage further germination.
    • Prune or thin surrounding trees to allow more lighting into the yard- for shaded spots.
    • Spray a fungicide (not very effective)

    Q53. How To Start A Riding Lawn Mower


    A riding lawn mower is the preferred trimming machine for large lawns.

    However, riding lawn mowers are sometimes difficult to start..

    Steps:

    1: Sit and ensure you can reach all levers and pedals.

    2: Press the brakes (push the brake pedal or lever). Also, engage its parking brake.

    3: Shift the mower’s gear to neutral. The shift lever should be near the steering wheel or below the seat.

    4: Engage the choke by moving the throttle lever to be between the fast & slow positions.

    5: Turn the ignition to the right- all the way. Hold the key for about 15 seconds. If it doesn’t start, turn off for 10 seconds then re-try for 15 seconds until the engine starts.

    6: Slowly release the choke by raising the throttle knob to the fast setting.

    7: Let the engine warm up before shifting to drive.

    Q5​4. How To Kill Dandelions In Lawn

    Dandelions have a tendency to invade even the most well-kept lawns and can be an absolute headache to remove.

    But despite the difficulties, you can permanently conquer dandelions.

    Here are the options:

    Removal
    • You can mow them out. Set the blade to cut high (beyond 2-2.5 inches) to allow grass to outgrow them.
    • Dig them out with “dandelion diggers”.
    • Starve them off sunlight to kill them. Just cover the dandelions with cardboards or plastic bags.
    • Unleash chicken and rabbits onto the hapless flowers.
    • Burn them away with a weed-burner torch.

    Natural…

    • Apply concentrated muriatic acid with a turkey baster to the dandelions.
    • Salt the dandelions. 1 tablespoon of salt piled at the base of the weed will eat it away.
    • Spray them with white vinegar ( head to base).
    • Pour boiling water consistently over each dandelion plant several times a day. This will trigger withering and death.

    Chemical…

    • Spray a systemic weed-killer (with glyphosate) directly to the weeds (not the lawn).

      

    Q5​5. How To Get Rid Of Red Ants Nests In The Lawn

    Even though ants are a crucial part of our ecosystem, red ants’ bites are painful. Additionally, some of their antics like building hills can cause pandemonium in the yard.

    So, how do you get rid of ant nests in the lawn?

    Natural Methods…

    • Pour hot water on the nests consistently to burn the residents to death.
    • Rake the nests during a dry day to avoid leaving a muddy mess.
    • Dig them all out and gently brush the piles of soil away.
    • Apply diatomaceous earth in the entire yard while pouring some in the nests.
    • Spray the nests with a mixture of liquid dish soap, canola oil, and water. Mix 1/2 teaspoon, 1 1/2 tablespoons, and 1 quart respectively.(you can replace canola oil with 3 tablespoons of cayenne pepper sauce)
    • Pour a quart of white distilled vinegar (5% concentration) in the nests.

    Other Options…

    • Spray an insecticide on the nests as instructed on the label.
      Mix borax with some sugar and scatter the solution near and around them. They will eat and die like in their zillions. Alternatively, buy and use a ready-made borax/sugar syrup mix
    zero turn mowers

    Zero Turn Mower Under $3000

    ​Smoothest riding zero turn mowers under $3000

    If you own a lawn big enough to require a riding lawn mower, the best zero turn mower ​ in the market should be among the top considerations you need to make.

    A zero turn excels at turf mowing because it is designed purposely to mow your lawn efficiently and safely. A number of features give you this single purpose efficiency.

    First, its tightest turn enables the machine to spin in place, a useful trait when you work a small space or when you need zero turning radius for those obstacles turning up on your path.

    Second, it features two drive wheels you can hydraulically control to spin independently. You initiate a turn when one of the wheels spins in the opposite direction or quicker than the other.

    The result is that its tightest turn lets the machine spin in place.

    Third, zero turn mowers are created with an extremely low center of gravity and their tires are wide enough to cause little damage to your lawn. Steering controls are hydraulic allowing you steer with exact precision while adjusting speed minutely.

     To enable you understand the numerous advantages you can get from the best zero turn mower under $3000, have a look at the six reviews below.

    ​Zero Turn Mower Under $5000 reviews 2018

    1. ​Ariens Zoom 42 – ​ 42″ Zero Turn Lawn Mower

    Price: Bottom of the range among similar products

    Application: For residential mowing on small to medium sized yards.

    Grass Cutting Height: Between 1.5 and 4.5 inches.

    Grass Cutting Width: 42 inches per sweep.

            Lovable Features

    • check
      ​Excellent zero turn mower for your medium sized lawn.

              Challenges

      ​This machine ensures it will cut your grass to golf course standard, it will not leave a trail of lawn clippings in your wake, because you can attach a collection bag, and its exit chute will not clog up easily.

      You will be able to clean the underside of its cutting deck with ease, a chore made easier by a mechanism that removes matted grass before it hardens onto the underside like cement.

      You can also easily flip the deck underside with ease to change the blades and clean it up.

      The seat is your throne that will save you from the jarring you could suffer as you work through bumps on your yard.

      This throne will give you unique ergonomics standards within the mowing industry, reducing fatigue without sacrificing your operation performance.

      Noise related nuisance to you and your neighbors will be the least of your worries because this machine has a 94 decibel noise maximum when the mower is engaged.

      Furthermore, trust is not something you can buy or sell easily but something that must be earned. The manufacturer has earned trust that their product is the smoothest riding zero turn mower in the market.

      Trust that this machine will take on the tough jobs, that the right advice on taking on that job is readily available, and that the machine will do what they told you it will do.

      ​2. ​Troy-Bilt Mustang 46 22HP 46-Inch Zero-Turn Mower

      Price: Middle of the range compared to its peers.

      Application: ​For residential mowing on medium sized yards.

      Grass Cutting Height: 8 adjustable height settings.

      Grass Cutting Width: 46 inches per sweep.

              Lovable Features

      • check
        ​Lap bars automatically engage brake parking when you open them to stand.
      • check
        ​Two transmissions work seamlessly as one to move back wheels in opposite directions.
      • check
        ​Front casting wheels enable it make 360 degree turns without damaging your lawn landscape.
      • check
        ​Tight turn capabilities reduce spots that require trimming after moving, saving time.

                Challenges

      • ​It apparently tends to slip if you mow hilly patches sideways rather than up and down.

      Its cutting system is uniquely designed to create an optional airflow that creates a vacuum that lifts your lawn grass for that superior cut and therefore no re-run required.

      Your throne is all of eighteen inches of a high backed seat whose dual suspension springs signify a comfortable and much smoother ride on bumpy patches of your yard.

      With mulching blade accessories, you can use this machine to mulch your lawn. Its heavy duty reinforced front axle and frame will give you a long mowing life.

      Two way adjustable and ergonomic lap bars give you control of the machine irrespective of your size. Furthermore, easy and fast attaching accessories will give you additional versatility on top of top grade mowing applications.

       Unique power take off systems gives you easy and fast blade engagement while grease fittings on the front axle allow for a longer service life. 


      It weighs 680 pounds and takes up 72.5 by 60 by 35.5 inches of your working and storage space. 

      ​3. ​Poulan Pro P46ZX Briggs V-Twin Pro 22 HP Cutting Deck Zero Turn Radius Riding Mower​

      Price: Middle average level compared to its peers.

      Application: Applicable for mowing lawns on medium to large home yard lots.

      Grass Cutting Height: 1.5 to 4 inches with six adjustable positions in half inch increments.

      Grass Cutting Width: 46 inches per sweep.

              Lovable Features

      • check
        ​Lap handles does away with straining associated with wheel steering.
      • check
        ​This machine does away with extra mower tool usage for trimming jobs.
      • check
        ​Has optional but wonderful accessories like rain cover, mulching, armrest, and headlight kits.

                Challenges

      • ​Literature about hydrostatic disconnects is not anywhere outside of the packaging as it should be.
      • ​It has some challenges staying straight or attempts to back up on hilly side lawns.

      Where other mowers would take between two and two and a half hours to accomplish a mowing job, this machine takes between thirty-five and forty-five minutes.

      It cuts brilliantly and creates a nicely brushed look on your ​lawn especially when you mow at an angle.

      Letting you maneuver around diverse obstacles like pools, flower beds, and trees is an awesome and standard feature that this machine gives you.

      Its unique hydro dual wheel transmission system guarantees this maneuverability, saving you lots of time on additional chores such as trimming or watering your lawn.

      With a simple forward or backward movement of your arms, you make your machine move left, right, forward, or backwards.

      It has features that allow you to easily and quickly attach accessories for additional applications, although it lacks a bagging system.

       It will mow at a six miles per hour top speed and has a 3.5 gallon fuel capacity, giving you a maximum of 2.4 acres per hour. It will take up 78 by 61.5 by 35.5 inches of your working or storage space and weighs 750 pounds.

      ​4. ​Husqvarna 967271701 54" 23HP Kawasaki Zero Turn Mower

      Price: Middle of the range compared to its nearest competitors.

      Application: ​Small to medium sized lawn yards.

      Grass Cutting Width: 54 inches per sweep.

              Lovable Features

      • check
        ​It throws grass with comparatively more power without clogging up.

                Challenges

      • ​Five miles per hour top speed is comparatively low.

      This machine comes with robust casters and a frame that ensures reduced chassis flex and enhanced durability.

      It has a spring assisted deck lift system whose controls are conveniently located to give you easy reach and usage.

      Its cutting deck is stamped steel reinforced with flat-stock heavy steel. This means comparatively enhanced strength and durability on its trimming side and leading edge.

      An integrated zero-turn transmission system means you get little to worry about regarding maintenance and performance.

      Features that let you attach accessories give you an opportunity to undertake additional chores such as grass mulching or bagging for other means of grass clippings disposal thereby saving you on numerous man-hours of raking, bagging, and subsequent disposal of mowed grass from your lawn.

      The gem feature in this machine is an air induction mowing system that lets air drawing from both the bottom of the deck and from the top.

      This accentuates grass lift and thereby the delivery of a superior one time grass cut, all making it among the ​top zero turn mower under 5000.

      ​5. ​Husqvarna 967334101 MZ54S 25V Commercial Zero Turn Mower, 54"/Twin

      Price: Upper middle range compared to its nearest competitors.

      Application: Suitable for commercial lawn mowing or a home with a big lawn yard.

      Grass Cutting Width: 54 inches per sweep.

              Lovable Features

      • check
        ​This machine is actually fun to operate according to reviews.
      • check
        ​It cuts lawn mowing time and gives comparatively higher mileage per liter of gasoline.

                Challenges

      • ​There have been complaints about the blades being poor requiring two to three trips to cut grass properly.

      This machine promises to give you four to five hours from a tank full of gasoline.

      This and its reliable commercial endurance 25 horse power HP engine, that comes with cyclonic air filtration system, guarantees a comparatively powerful but smooth lawn mowing performance.

      A critical feature in grass cutting, its air induction mowing system works by drawing air from the deck top and bottom creating grass lift and therefore an enhanced cut, is a standard feature in this machine.

      For long lasting durability and strength, its deck is reinforced and stamped with flat-stock heavy steel. Such is the manufacturer’s confidence in their machine that they are prepared to grant a three year limited warranty to you.

      Its intuitive operation interface, an ergonomic weight and height adjustable seat, a frame made of heavy-duty steel, and a commercially rated hydraulic mechanism ensure you get the ultimate in lawn mowing experience.

      It will occupy 90.5 by 59 by 34.5 inches of your storage or working space and weigh 840 pounds.

      All these features combine to create a zero-turn mower that takes comfort, productivity, and performance to an entirely new level.

      ​6. ​Troy-Bilt 25HP 725cc Twin Cylinder Transmission 54-inch Pivot Zero Turn Mower

      Price: Lower middle level compared to its closest competitors.

      Application: Suitable for medium to large home lawn yard.

      Grass Cutting Height: 8 adjustable height settings.

      Grass Cutting Width: 54 inches per sweep.

              Lovable Features

      • check
        ​Combines zero turn mower performance and precision with steering wheel control and natural motion.

                Challenges

      • ​The seat has one ordinary spring instead of two heavy-duty springs.

      This zero turn mower with steering wheel comes with a unique four wheel steering mechanism that gives you precision control as you mow on uneven terrain and hilly patches.

      This mechanism gives it high ratings when it comes to zero turn mowers for rough terrain.

      You will reign over your mowing operations from a comfortable eighteen inch high back seat. The seat has cruise control settings you can adjust from a screw knob, ensuring mowing over bumpy terrain is comfortable with no painful jarring.

      Zero turn maneuverability that saves time through doing away with a need for follow-up trimming is a standard feature of this machine.

      Front axle grease fittings are standard and you can easily grease the front caster wheels, all ensuring longer bearing and operation life. 54 inch triple blades on a side discharge deck, coupled with a premium integrated deck wash, guarantees a cut like a golf course lawn.

      Its unique power take off mechanism ensures blade engagement is quick and easy. A heavy-duty reinforced steel frame gives it durability and unique sturdiness. Everything is powered by a 725 cc twin cylinder 22 horsepower Kohler engine with dual EZT transmission.

      Forward and reverse speeds raise to 7 and 2.5 miles per hour respectively. It will take 84.5 by 63 by 35.5 inches of your storage or working space and weigh 829 pounds. All these features come together to give you a  ​ zero turn mower for hills you can buy.

      Wrapping up

      If you are looking for the best zero turn mower under 3000, important features to identify include a mower that throws out grass with enhanced power without clogging up.

      One with technology allowing grass lift to enable a clean cut and therefore no repeat runs, and one whose manufacturer is trustworthy in designing machines and accessories that solve your mowing problems.

      Easily available and attachable accessories should enable bagging and mulching, and it should be capable of working on hilly or sloping landscape with ease.

      It should reduce extra work such as trimming lawn edges after mowing. The seat needs to be comfortable and adjustable to your height and weight too.

      The product reviews above narrow your choices down to six from a myriad products in the market.

      How to clean a snowblower carburetor without removing it

      ​How to clean a carburetor without removing it

      You occasionally have to clean a dirty snowblower carburetor to avoid facing an impeded performance.

      And while you can remove it and scrub the carburetor from outside the blower, knowing how to clean a snowblower carburetor without removing it saves you a lot of time and stress – especially if you passionately dislike opening up machines.

      The good thing is that you don’t have to be a rocket scientist to hack it- as you will see shortly.

      But before we look at that,let’s briefly look at a few issues related to a snowblower’s carburetor:

      Signs that your Carburetor is dirty

      The lingering question for many snowblower owners surrounds knowing when a carburetor needs cleaning.

      Here are the tell tale signs.

      Starting problems

      If your carburetor is clean (and working smoothly), the snowblower engine should start without much ado.

      Carburetors fail to start properly when grimy because the dirt blocks the correct combination of fuel and air from traveling through their usual opening to the engine, bringing all manner of problems.

      Poor idling

      If you notice that it suddenly develops a habit of rough idling (your blower feeling irregular and bouncy when its engine is running) or it’s idling too fast, then it could be time to cleanse it.

      Uneven acceleration

      Again if it’s working properly, it should accelerate without stumbling. So unbalanced or start-stop acceleration is another clear sign that you need to clear any deposits.

      Greedy fuel consumption

      When it develops an increased appetite for gas, then it could be that it’s dirty.

      Flooding

      Obviously flooding results when too much fuel gets into the cylinders.

      A carburetor could be faulty or it may have debris in its needle valve -which makes it stick open causing a spillage.

      What to do Before Cleaning your carb

      To effectively remove gum, varnish, and dirt from the carburetor, you will need to do some preliminaries.

      Revisit your owner’s manual

      To have it your way, it’s better to first go back to your snowblower's owner's manual.

      Your motive will be to re-read everything about the carburetor. You will most likely come across rich information that may help you during the process.

      You can download the manual from the manufacturer’s website if you no longer have a copy.

      Check the condition of the Air Filter

      Start by inspecting the condition of your air filter so as to ensure that only clean air (free of residuals) is coming into your carburetor.

      That’s because your snowblower will continue emitting black smoke even after cleaning if the air filter is clogged.

      Clean the filter or replace it if it’s nearing the end of its useful life.

      Cleaning your snowblower’s carburetor without removing it– step by step

      You will use a cleaner to cleanse the carburetor while it’s still in the snowblower.

      Carburetor cleaners are liquid solutions made to methodically dissolve layers of dirt and choke from the inside/outside of a carbso to improve engine performance and reduce downtime

      Items you need:

      • A socket wrench
      • A wire brush
      • A copper wire (piece)
      • Compressed air can
      • A carburetor cleaning solution

      Step 1: Turn off your SnowBlower

      Maintaining a machine when its running can be hazardous.

      So start by turning off your snowblower.

      Also, allow it a couple of minutes to cool off.

      Step 2: Remove the Muffler

      To fully access the carburetor, you have to remove the muffler.

      Using your socket wrench, remove the bolts/nuts holding the snowblower's muffler in place.

      The manual should help you locate the muffler on your engine assembly.

      Step 3: Take out the gas tank

      Here you have to be mindful not to spill fuel.

      Still using your socket wrench, remove the bolts holding the snowblower’s gas tank.

      Then slide it carefully off and place it aside.

      Step 4: Place an Empty Pan/Container under the Bowl

      You will be draining fuel from the carburetor in the next stage and to do this, you require a collecting container.

      So, site your snowblower's carburetor bowl – check your manual- and place a container or apan under it.

      Step 5: Drain The Fuel

      It’s almost impossible to effectively unclutter your carburetor without emptying fuel.

      To do this, remove the nuts on the base of the bowl. Fuel willstart drainingfrom the carburetor.

      Wait until your carb is fully emptied before removing the pan.

      Step 6: Clean The Bowl

      By now, your carburetor’s bowl is loose.

      Twist it off.

      Now wet a piece of clothusing your carburetor cleaning solution.

      You can now clean the bowl’s inside.

      Step 7: Scrub The Nuts

      Some residue normally remains on the nuts.

      To remove such debris, spray a sufficient amount of your cleaning solution on the bowl’s nuts and scrub them using a wire brush.

      Step 8: Clean Dirty Holes

      Using a copper wire, clean out any visibly tarnished small holes in your carburetor.

      Also,spray around the carburetor’s throat to eliminate deposits from its throttle plate area

      Step 9: Blow Leftovers

      Wipe out any other grim that maybe pending by blowing it out using compressed air.

      For maximum efficiency, apply the compressed air can to each hole.

      Step 10: Reassembly

      Now all the grim should be out in the cold and your carburetor spotless.

      Reassemble the carburetor bowl and everything else by following the previous steps in reverse.

      Don’t forget to shine the outside of your carburetor plus all other linkages once you put back everything into place.

      Precautions:

      • The engine should be off and cool.
      • Never sprayon electrical connections.
      • Some of the sprays deface painted surfaces. In case you accidentally spray on such painted areas, wipe it off at once to avoid damage.

      Wrapping it up

      Knowing how to clean a snowblower carburetor without removing it saves you time and the stress associated with opening a carb.

      And the best part is that it’s as effective as the traditional carburetor removal approach.

      You will no longer experience hard starts, sputtering, bouncy idling and all the related teething problems.

      So, don’t let carburetor problems to suffocate your snowblower just because you aren’t a fan of opening stuff.

      Experiment with our steps and over time; you should become a pro.

      Best yard treatment for fleas

      Insect Killer for Yard

      ​Insect killer for lawns safe for pets

      Best yard treatment for fleas

      Your yard creates an excellent habitat for insects. In their search to quench their thirst for blood, fleas, ants, and other bugs will spread sicknesses around your home, pester your pets, and cause skin soreness among  your loved ones.

      This means in your quest to get rid of them, you will require finding the safest ​ insect killer for yard from a wide selection.

      In your hunt for the best flea killer for lawns, remember an excellent treatment is one that not only gets rid of these irritants after an infestation but also one that keeps them away from you and your pets over a long period.

      Below are five top rated insect killers for lawns and safe for pets treatments from which you can pick one that suits your unique situation.

      ​Lawn insecticide for Yard ​ 2018

      1. Spectracide Triazicide Insect Killer For Lawns & Landscapes Concentrate (Ready-to-Spray)

      Product Format: Spray

      Targeted Insects: More than 250 types such as fleas, harvester ants, carpenter ants, earwigs, ticks, mosquitoes.

      Coverage: 5,120 square feet outdoors only.

      Repelling Period: Three months maximum.

      Major ingredients: 0.08% Gamma – Cyhalothrin

      Children and Pet Safe: Yes

      Organic: No

              Lovable Features

      • check
        This Spectracide Triazicide insect killer for lawns kills insects that reside both above and below ground killing both visible insects and those unseen.
      • check
        You can apply it on your fruits and vegetables but be careful when harvesting dates approach.

                Challenges

      • You can apply it on your fruits and vegetables but be careful when harvesting dates approach.
      • It is toxic to aquatic creatures therefore avoid spraying on rainy days or around stagnant or treated water.

      You are the master of your destiny and you should not let fleas, ants, or any other insect take that from you.

      ​With this triazicide insect killer for lawns you not only have a perfect answer to your question but also have the perfect weapon that guarantees that mastery.

      You can spray bushes, trees, and plants, and everything within your backyard that includes house walls and patio. Rejoice because this means it is safe for your food plants and vegetables and you will therefore not need to pick between healthy food and killing fleas.

      However, you cannot use it inside your home.

      To effectively apply this treatment, shake the container well, then connect it to your watering hose, switch on the water and fire away. Remember to avoid open water targets such as lakes, gutters, the seaside, and drains.

      Triazicide insect killer for lawns reviews widely confirm that it will not leave behind any repugnant odors, it is residue free, and its effectiveness is comparatively long lasting, up to eight weeks. Finally, it is a pet friendly lawn ant killer.

      2. Ortho Bug B Gon Max Insect Killer for Lawns 

      Product Format:  Spray

      Price:Top of the range among its competitors.

      Targeted Insects: More than 235 types including fleas, mosquitoes, ticks, spiders, ants, chinch bugs.

      Coverage:Outside only, up to 5,300 square feet.

      Repelling Period: Three weeks maximum except spiders repelled for six months.

      Major ingredients: 0.075% Zeta – cypermethrin and 0.3% Bifenthrin

      Children and Pet Safe:Yes

      Organic:No.

              Lovable Features

      • check
        Although it has chemicals and toxins harmful to insects, it leaves no synthetic odors or residue behind.
      • check
        It kills and keeps away both visible and invisible insects living above and below ground in your yard.
      • check
        Its quite efficient and long lasting in killing on contact and keeping away various insects from your garden and lawn

                Challenges

      • This bug B gon insect killer for lawns is toxic to fish, small aquatic organisms and bees.
      • It is not safe inside dwellings but intended solely for outdoor application.
      • Despite being among the highest rated ant killer for lawn applications, it is not safe on fruits and vegetables due to chemicals harmful when consumed.

      This Ortho max insect killer for lawns is easy to use with three simple steps to follow.

      Shake the bottle vigorously, connect to your hose, turn on the water and pick your target. The ​right time to spray with this top rated insect killer for lawns is when you first notice bugs or damage on your plants.

      It is effective around your lawn, flower bed, garden, and home perimeter. It is safe when applied on roses, shrubs, and trees. It is also great around your home on your patio, and other outside living areas.

      It is among the few ant killer safe for dogs, lawn playing grounds for your children, and grass sports.

      Do not apply it inside however.

      It destroys insects immediately on coming into contact which means you will see results instantly.

      3. Permethrin SFR 32 oz Pest Control Insecticide-  yard spray for fleas and ticks

      Product Format: Spray

      Price: Top of the range compared to its nearest competitors.

      Targeted Insects: Ticks, fleas, roaches, aphids, underground termites, and 75 other types of insects.

      Coverage: Recreational areas, athletic fields, ornamental gardens, lawns, indoor cracks and crevices.

      Repelling Period: One week.

      Major ingredients: Permethrin 36.8%

      Children and Pet Safe:Yes except cats.

      Organic: No.

              Lovable Features

      • check
        This chemical is safe for both indoor and outdoor insect destroying applications.
      • check
        It kills eggs, larvae, and adult insects.
      • check
        It is safe when mixed with other products such as carpet shampoo.

                Challenges

      • It has a very strong scent and you need to wear a mask when you apply it.
      • It is safe around dogs but is toxic to cats.

      If you are searching for an insecticidal barrier against a wide range of bugs and insects, look no further than this solution.

      Among the insect infestations this product gives you an arsenal against( include the control and prevention of underground) termite infestations in and around any of the structures you have on your property.

      For the most effective results, disperse this emulsion into the soil and establish a barrier between the termites in your soil and any infested structure.

      It provides an effective, long lasting, and fast controlling solution to irksome insects both indoors and outdoors in your home. It is also a professional grade but low odor product.

      One quart of this solution will give you up to twenty gallons of an insect lethal solution, the package takes 14.2 by 8.6 by 5.7 inches of your storage and weighs 2.4 pounds.

      ​Dousing it on your deck, wooden posts, around porch lights, and the roof will give you the pleasure of sitting outside for hours.

       Is picking up acorns from your lawn a big issue? check out these acorn pick up tools

      4. Spectracide Triazicide Insect Killer For Lawns Granules, 10 lb. -​

      Product Format: Granules

      Price: Bottom range compared to similar products.

      Targeted Insects:100 types of insects, repelling and killing of mosquitoes.

      Coverage:Outdoors only for 12,500 square feet.

      Repelling Period: A maximum of three months.

      Major ingredients: Gamma – Cyhalothin 0.05%

      Children and Pet Safe:Yes.

      Organic: No.

              Lovable Features

      • check
        No residue, offensive odors, or particles left behind from the granules.
      • check
        Once you have treated, watered down, and allowed an area to dry, your children and pets can safely return onto your lawn.

                Challenges

      • To effectively apply these granules, you will need to purchase a granule spreader.
      • Despite being safe for animals and humans, this spectracide insect killer for lawns is toxic to underwater life and application is prohibited into sewers, drains, and open water.

      Against bother-some insects and ants, spectracide triazicide insect killer for lawns granules reviews have flattering things to say regarding how effective it is.

      Its formulation gives you wide powers to control insects on your lawn, kill them on the spot, and creation of a defence barrier around your home and whose advantages are second only to spectracide 20-lb triazicide insect killer for lawns granules.

      Application is simple.Using a rotary spreader or broadcaster, spread the granules onto your dry lawn and yard. Immediately after spreading the granules, water your lawn lightly and leave to dry. That is all.

      ​Remember to closely follow any specific instructions on the application manual unique to your situation.

      How do you hide sprinklers from your lawn?  ever thought of decorative sprinkler valve covers.

      It is safe for your kid and animals once application has dried up. This means your loved ones are completely safe around a treated area.

      Your lawn remains protected for an entire season, at least three months, however, you can retreat an area earlier, particularly if you neighbors do not have such a powerful treatment.

      5. Terro T300 Liquid Ant Baits - ​ ant mound killer

      Product Format:Ready to use pre-filled liquid bait station

      Price:Bottom of the range

      Targeted Insects: Kills fire, carpenter, and other common household ants

      Coverage: Anywhere indoors where ants pass as they forage.

      Repelling Period: Not defined.

      Major ingredients: Sugary-liquid baited borax insecticide

      Children and Pet Safe:Yes

      Organic:Yes

              Lovable Features

      • check
        Kill the ants you see within forty-eight hours and those back at the colony within two weeks
      • check
        You can place it in numerous areas including garage, basement, and kitchen.

                Challenges

      • You need to eliminate other ant food sources near the spot where you place the bait.
      • Bait may be ineffective when the colony is in its breeding cycle and therefore not interested in eating.
      • Ants do not die on contact and you need to monitor bait activity regularly.h daily hard use, lasts between three and five months.

      Compared to other contact yard ant killer safe for pets applications, this bait attracts ants quickly, slowly kills those you see, and kills ants back at the colony, completely destroying it.

      Contact killers on the other hand kill insects immediately, work as spot treatment, and give you residual protection.

      The way this solution functions is that ants drink the bait and, through regurgitation or trophallaxis, feed other ants back at the colony spreading the poison and therefore destroying the entire colony.

      Its only competitor in this regard can only come from the ​ oatmeal lawn ant killer product out there.

      To apply it, break apart the stations, hold upright, with a pair of scissors cut of the colored part, and place the bait station near an ant trail.

      Is your water pressure a major obstacle to your lawn? these low pressure pop up sprinkler heads could be the solution you need.
      Wrapping up

      Your outdoors is filled with different bugs and numerous insects. They live and thrive on your shrubs, trees, water, and on your furniture.

      This means you need to find and apply the best rated lawn ant killer granules, sprays, or baits.

      The top hiding, breeding, and living spot for most bugs and insects is the grass on your lawn and soil in your yard. Under the ground in the soil in your backyard is another pest hiding place.

      These environments protect them from summer heat and sunshine while grass protects them from being blown away on windy days.

      Your children and pets also love to roll and play around the grass on your lawn. If you really care for them, then a non toxic insect killer for lawn solution is ​what you need.

      This all means that to protect your loved ones, make sure you have the ​right dis infestation product in your war chest from the insect killer for lawns reviews above against these undesirable disease causing irritants.

      ​https://growtheherbs.com/garden-tools/

      https://growtheherbs.com/garden-genie-gloves/

      https://growtheherbs.com/garden-tools-elderly-disabled/

      air ride seats for zero turn mowers

      Air ride and suspension seats for zero turn Mowers

      universal tractor seat with adjustable suspension

      air ride seats for zero turn mowers

      Do you need a solution for the jarring you suffer as you mow through the bumps on your lawn? Air ride seats for zero turn mowers are products specifically designed for this.

      An air ride seat will give you excellent industry specific ergonomics.

      These will drastically reduce operation fatigue but not sacrifice your performance or durability the professional in you requires to accomplish your assignments.

      The suspension seat for zero turn mower is one that best fits your unique situation. The reviews below will help you pick just the right one for you.

      ​Air Ride and suspension Seats For Zero Turn Mowers reviews 2018

      1. ​Seat Suspension for Exmark, Kubota, John Deere, Z Trak, Toro, Hustler ZTR Lawn Mowers

      ​Compatible Models Include:

      John Deere: 445 – Except Z Trak 600, 500, and 400 series mowers

      Toro: Toro Titan 5400, Toro TimeCutter SS4225

      Kubota

      Hustler: Hustler Raptor zero turn mower

      Scag Tiger Cub 2004

      ZTR

              Lovable Features

      • check
        ​You will sit up higher on the tractor and gain more ergonomic arm positions to operate the levers.
      • check
        ​Your hands and arms will come straight off your armrests and onto levers controlling operations.

                Challenges

      • ​Some models may turn out to be incompatible as a result of annual changes.
      • ​You must carefully scrutinize diagrams, pictures, dimensions, and mounting patterns to determine its compatibility with your machine.

      You must have a John Deere suspension seat for zero turn mower if your zero turn does not have a suspension seat and you running it on bumpy cutting expeditions.

      It works by transferring vertical motion resulting from bouncing up and down through bumps into horizontal sliding motions.

      Its low profile suspension mechanical system gives you more comfort and a smoother ride from numerous zero turn mower brand names, tractors, and loader machines.

      This suspension seat for zero turn hustler mower kit will bolt underneath an existing seat and gives you easily adjustable ride and weight control. It is heavy duty, measures 20 by 14 by 4 inches and weighs 20 pounds.

      2. Seat Suspension Kit Fits Snapper Pro,Ferris, Cub Cadet Tank, Big Dog, Yazoo

      Compatible Models Include:

      Ferris 2100z

      Ferris 400s 48”

      Gravely ZT HD52

      Snapper 550z

              Lovable Features

      • check
        ​Installation is simple and straight forward if you keep up with the suspension seat for Ferris zero turn mower directions.
      • check
        ​Bolt holes all line up therefore there is no need for drilling.

                Challenges

      • ​You may require to remove some cable ties from the seat shutoff wire allowing enough slack to plug back in.

      With compatible models, this suspension seat for big dog zero turn mower fits snugly with no alterations or drilling needed through an hour of installation.

      This suspension seat kit works great in removing those bone jarring bumps that arise from hitting hard those holes you see too late.

      This seat kit is also easy to adjust. Bounce as you sit on the seat and tighten adjustment until its suspension stops bottoming out from your bounce. That is unless your kit is a used suspension seat for big dog zero turn mower meaning this is already done.

      It is a heavy duty commercial product with superb finishing. It contains universal type mounting that fits numerous zero turn mowers with minor changes arising from annual adjustments.

      This suspension seat for gravely zero turn mower goes onto your machine through bolting underneath your existing seat and comes with a simple ride and weight control mechanism. It weighs 20 pounds and measures 20 by 14 by 4 inches in dimensions.

      3. Universal Seat Suspension For Most Brands Ztr Zero Turn Mowers Deere,Exmark #FD

      Compatible Models:

      This is a universal seat suspension fitting an array of brands, including:

      ZTR

      John Deere

      Exmark

              Lovable Features

      • check
        ​This seat goes underneath you current seat to give you a more comfortable and smoother ride
      • check
        ​It comes with an easily adjustable riding and weight control system

                Challenges

      • ​It is your sole responsibility to determine you purchase the right item fitting your current model mounting configuration.

      Undo four bolts, replace with four bolts and you are now ready to venture into the frontlines to fight your ongoing war with the turf.

      An excellent way to determine if this Michigan suspension seat for John Deere zero turn mower kit fits your zero turn is to take measurements of your bolt pattern on your seat bottom.

      This kit requires to be 11.5 inches front to back and 10.69 to 11.25 inches side by side. An alternative is 9.50 inches side by side for this kit to function.

      You also must have slider slacks that give the kit enough room to suspend or move. The alternative would be incorporating longer bolts and spacers that allow the kit some movement.

      This suspension seat for John Deere zero turn mower kit will take up to 286 pounds and rises 2.75 inches high. This gives you about one inch of suspension. It measures 20 by 14 by 4 inches in overall dimensions.

      Planning to buy a lawn mower bag or universal catcher for your mower? This buyer guide will come in handy.

      4. Maxpower 12530 Seat Suspension Only for Riding Mowers and Tractors

      Compatible Models Include:

      Husqvarna YTH 18K46

      Husqvarna GTH5224

      Toro Z-Master 2010 48 inch Mower

      Kubota Z421

      Cub Garden Tractor

              Lovable Features

      • check
        ​It comes with easy to operate controls for your weight and riding functions.
      • check
        ​Its design purposely targets your comfort as you operate equipment with limited vertical space.

                Challenges

      • ​You may require to remove factory rails under the seat and put a plate between older rails and seat.
      • ​You must scrutinize instructions closely for proper installation.

      This suspension seat for Husqvarna zero turn mower makes your ride 100% better with no more back pains to worry about after you have mowed your lawn for a few hours.

      The suspension raises your seat a few inches, which works together with your armrests to put your arms in a much more comfortable working position.

      Slight forward and backward sliding of your seat gives you better access and handling of throttle pedal depending on your height.

      Its weight adjustment controls lets you adjust the seat to better accommodate your weight as you negotiate extremely rough areas of your yard and reverting back once you are on fairer ground.

      It measures 19.5 by 13.5 by 4 inches and weighs 19.39 pounds.

      5. BestEquip Universal Tractor Seat Folding Mower Seat Suspension with Armrests and Adjustable Backrest Suspension Seat for Forklifts Mowers and Tractors

      Lovable Features:
      • Fabricated from polyurethane high rebound foam, durable leather, and firm steel plating.
      • Safety assured through highly effective shock absorbers.
      • Comfort arises from adjustable backrest, armrests, and headrest. The backrest can be adjusted up to 115° depending on your comfort level.
      • Fabricated for laborious and tiresome shifts in engineering, construction, lawn, and hauling.

              Lovable Features

      • check
        ​It is a universal tractor seat compatible with most tractor brands.

                Challenges

      • ​A seat belt and mounting hardware are not included in the package despite picture featuring.

      This seat will take a maximum load of 287 pounds and has an aft and fore adjustable distance allowance of 7 inches.

      You can adjust the back of the seat to a high of 115° of the back to seat area while the suspending range is 3 inches. You can adjust the seat height between 2.4 and 1.2 inches both ways.

      Its measures 23.23 by 23.23 by 18.9 inches in dimensions and weighs 76 pounds in the package.

      All together, these features create a seat made of the right material that performs wonderfully with its spring seat and reclining back. These features make it ideal for turf, grounds, construction, and industrial equipment.

      6. Happybuy Universal Pro Seat and Suspension Seat with Adjustable Armrest ​ with High Shock Absorption for Riding Mowers Tractors ​

      Loveable Features:
      • Custody of this kind of a seat is critical particularly if your assignments are tiresomely and laboriously spent behind the wheel of an industrial, construction, or farmyard tractor.
      • For your comfort, you get a high back seat with sturdy features and gracious black covering.
      • You get a reclining adjustable back that takes your weight with ease up to 330 pounds.
      • Furthermore, this is a universal seat for your tractor so long as it fits its size.

              Lovable Features

      • check
        ​Fully adjustable armrests, reclining backseat, with suspension features.

                Challenges

      • ​You must check its dimensions and installation features to ensure it fits your tractor before purchasing.

      This product has parameters that give you excellent value with less than thirty minutes of unpacking and installation.

      You get a fore and aft adjustable positioning 7.08 inches both ways, with dual sliding for a positive seat positioning. Your backrest is adjustable forward 90 degrees and backwards 28 degrees.

      You also get mechanical suspension, three-position height, and weight adjustment control systems.

      Weight adjustment ranges between 110 and 330 pounds, height between 0 and 2.36 inches, while seat stroke suspension ranges between 0 and 3.15 inches.

      These zero turn mower seats measures 23 by 28 by 23 inches and weighs 83.5 pounds. The packages contain a manual, a seat belt, and a suspension seat with head and arm rests.

      7. Grammer MSG95 Air Suspension Seat Case IH Ford New Holland Kubota Massey White

      • This Grammer air ride seat can readily replace the original seat that comes with most tractors. It is a heavy-duty, top quality seat with air suspension assembly qualities.
      • This seat will comfortably take your weight up to 385 pounds and lets you adjust fore and aft movements and height easily.
      • Accessories associated with lumbar support include a seat belt, operator presence switch, and a swivel kit.

              Lovable Features

      • check
        ​Seat specifically fabricated for absorbing vibrations normal in heavy, axle or cabin suspension tractors.

                Challenges

      • ​Lumbar support associated accessories are sold separately.

      This grammer air ride seat comes with a passive climate control system, stroke suspension rising to 3.9 inches, and a low frequency air suspension powered by a twelve volt built in air compressor.

      You will get arm rest kits and a fore and aft seat isolator whose adjustments go both ways 8.3 inches. Seat height adjustment rises 3.1 inches while seat backrest angle has a setting range from minus 10 degrees to 34 degrees.

      You can swivel the seat both ways up to twenty degrees, and it weighs 86 pounds. These features come together to create a comfortable working Grammer suspension seat for zero turn mowers for your laborious and tiresome assignments.


      Wrapping up

      Once you have identified the ​right product from among the above air ride seats for zero turn mowers solutions available in the market, you will not feel like you are riding on a cloud.

      However, a suspension seat for zero turn mower will do away with the knee and back pain associated with working on bumps found on your lawn.

      Pick a unit that is easy to install, will fit numerous zero turn models, one that removes the kick from the bumps but also makes your work comfortable, and one that works seamlessly with your original seat.

      It must also be reliable and come at a worthy cost price.

      Dont forget to check our mower section for all mower related issues.

      Related Reviews and Guides

      Do Brand New Lawn Mower Blades Need To Be Sharpened

      ​How to sharpen a mower blades

      You have finally made the decision to replace your mower’s blade.

      Maybe you feel it has been completely battered by the rocks or the usual foreign objects that you can’t miss in a lawn.

      But upon receipt, it’s painted and doesn’t look razor sharp and so you feel that a round of sharpening may improve the cut.

      But should you? Do brand new lawn mower blades need to be sharpened? how do you sharpen mower blades?

      Here are a few pointers:


      It’s true that a sharp blade will save your time and energy when mowing. It also ensures a super clean cut on top of helping to reduce the spread of infectious lawn fungus.

      But what is a sharp blade and how sharp is sharp?

      An excellent cutting edge doesn't imply a small(sharp) angle. In fact, for a healthy cut, what you need is not a razor-sharp feel but a perfect cutting edge.

      And a fine cutting edge may even have several angles.

      Here is the trick:

      If the angle is too acute (at the apex), the blade won't have enough muscle to maintain the collision with overgrown grass and will easily bend, fold, and even nick.

       In any case, a number of users report that once they sharpen their blades "razor sharp" the edge folds over quickly rendering the blades dull after only a few cuts.

      To Sharpen or Not To?

      As I had mentioned, some gardeners feel that the paint coating make blades to seem not sharp enough and will always sharpen their new blades.

      Other lawn owners will say blades are okay just right out of the box and that if you sharpen;they wear out and dull within a few uses.

      And the debate continues…

      Now, this is what you need to know:

      A majority of the blades comes sufficiently pre-sharpened and balanced so you just install them and get down to work.

      And the paint surely comes off soon enough.

      However, it’s good to check their balance before installing.

      I have actually been forced to do a bit of touching up to get blades balanced a couple of times.

      That said, the factory edge has an almost perfect bevel angle and will do a thorough job without extra sharpening- at least for the major brands.

      When Should You Sharpen Your Mower’s Blades?

      To know if your blades are ripe for sharpening, keep an eye on your lawn (after cutting) for these signs:

      • Does the grass look torn and frayed?
      • Are patches of the grass yellowing or browning out?
      • When did you last sharpen it?

      Always, the grass should remain green and have a smart clean line with minimal tearing.

      How to Sharpen Your Lawn mower’s Blade

      You don’t lack choices when we come to sharpening:

      • Use a File
      • Use a bench grinder.


      Sharpening a Mower’s Blades Using a File

      Here is how to sharpen a lawn mower blade with a file:

      • First, detach the spark-plug wire to ensure the engine won’t accidentally roar to life.
      • Turn the lawnmower sideways such that its spark plug will point vertically.
      • Remove the blade. You will use your ratcheting socket wrench to unscrew the nuts attaching it to your mower.
      • Now get a vice (or any other sturdy clamp) and clamp the blade.
      • Take a metal file and sharpen your blade to “butter knife” sharp while maintaining the original cutting angle.
      • Now reinstall your blade and remember to tighten the nuts using your wrench.
      • Finally, lower your mower and fix the spark-plug wire
      TIPS
      • Always wear eye protection and heavy gloves before starting.
      • You should preferably execute only one stroke (either push or pull).
      • You don’t have to file it razor sharp. Just eliminate all the minor nicks and obtain a decent cutting edge.
      • You may mark the outer edge of the blade-just before removing it. This helps you to reinstall it correctly once you’re through with sharpening. As you’ll note, it’s very easy to confuse the sides.
      • Some lawn mowers are designed such that you can access the blade through an opening on the sides making it possible to sharpen lawn mower blade without removing it.

      How to Sharpen a Lawn Mower Mulching Blade with a File 

      If you own a mulching lawn mower, you may wonder how to sharpen a lawn mower mulching blade with a file or how to sharpen a curved lawn mower blade with a file.

      Now, the good news is that the procedure for filing is almost the same and provided that you remember to file at an angle aligned to the beveled edge, the cutting edge will still emerge sharp.

      How To Sharpen Lawn Mower Blades With A Bench Grinder

      Compared with a file, a bench grinder is easier to use and takes less time.

      Here is how to sharpen lawn mower blades with a bench grinder:

      • As usual start by removing the blade. You just repeat the steps I highlighted above.
      • Then, firmly clamp the blade. Now you are ready for sharpening.
      • Before you commence, hold your grinder against the mower’s blade and tip it down or up until the fitted grinding disc (preferably a grinding stone) is perfectly aligned with the optimum angle on your blade.
      • Having confirmed your grinder settings, now turn on the grinder and get down to business.
      • Ensure you hold the disk perpendicular with your blade’s thin edge.
      • Run the grinder until the first cutting sides become sharp.
      • Then remove the blade and flip it over to file the other edge.
      • Keep passing again and again- if necessary- and monitoring progress continuously to avoid narrowing the angle extremely.
      • Now reinstall your blade as we had seen earlier.

      Tips

      • Take breaks when sharpening as the heat resulting from the friction can melt the blade. You can also cool the blade using water.
      • Don’t apply too much pressure as the blade may end being damaged. Excess pressure also increases the risk of overheating
      • If your blade is cracked, has deep nicks, is bent or is worn thin, sharpening may not help. Consider buying a new one.
      • Improvising a lawn mower blade sharpening jig for bench grinder can help you come up with a straight cutting edge.

      Proper angle to sharpen lawn mower blades

      Sharpening the blade at the wrong angle will make it to shine without making it sharp. To get the ideal edge, angle your blade toward the grinding disk.

      So, what is the proper angle to sharpen lawn mower blades?

      In most cases, an angle of about 35 to 45-degreesis recommended as the optimum when sharpening any blade though it varies with your brand.

      However, if you can, always maintain the factory angle.

      How Often Should You Sharpen?

      How frequently you should sharpen depends on:

      As a general rule, monitor your grass appearance up close and also far away. If it looks immaculate, your blades are fine.

      Otherwise, it’s time for honing.

      Conclusion

      The question “do brand new lawn mower blades need to be sharpened?” largely depends on the brand and your personal preferences.

      But by and large, most of the manufacturers pack their blades ready for use and they will cut neatly right out of the box.

      However, in some cases, you may find a blade too dull and be forced to sharpen for a smart cut.

      Lawn Mower Bag: Universal Grass Catcher

      ​​Universal grass catchers for zero turn and push mowers

      If you are looking to maintain an amazing lawn, and saving time while doing so, then a durable, reliable lawn mower bag or a grass catcher is a tool you must have.

      With one, all that time you would have spent raking up grass clippings from your lawn mower would be better spent doing something else.

      The results are a clean looking and professionally done curb appeal, enhancing the value of your property while making your lawn the envy in your neighborhood.

      There are numerous lawn mower bags types out there.However, many are not what they are cranked up to be. Others are not durable while others will not be compatible with your preferred lawn mower.

      This means you have to search for one that works with your lawnmower or buy a universal grass catcher.

       To help you make the right choice, below are reviews of nine ​highly rated lawn mower bags the market has to offer.

      ​Lawn Mower Bag: Universal Grass Catcher Reviews

      1. PK-EX4 4.4 Cubic Foot Large Capacity Grass Catcher by Pack'em Racks

      Application: Great for small yards.

      Effectiveness: Adequate capacity for residential use.

      Ease of ApplicationHas no issues working around trees or up and down hills.

      This grass catchers for zero turn mowers comes with more than 4 cubic feet of capacity with one bottom piece for prolonged working life.

      It is made on a tough welded frame and whose plated mounting pin assembly results in enhanced durability.

      Its powder coat finishing is baked on giving it durability that far outweighs ordinary paint. Each of its steel panels have been formed onto its frame creating a cleaner look and enhanced fitting.

       It is important to note however that this is not a universal grass catcher and you need to verify with your customer care agent it fits your lawn mower before you make an order.

              PROS

      • check
        Excellent customer service when determining correct model for your mower.
      • check
        Installation instructions are well articulated and easy to follow.
      • check
        Powder coating promises to be long lasting.

                CONS

      • This is not a universal lawn mower bag and therefore you need ensure from Pack-em it fits your mower.
      • “B” mounting option requires you to tilt the bagger too far forward as you disengage the full bagger.
      • Leaf dust may come out of the top holes calling for a piece of screen.

      2. Lawn Tractor Leaf Bag- Never Rake Again

      Application:Holds 40 bushels or 54 cubic feet of material

      Effectiveness: Coverts your tractor lawn mower grass catcher into a huge leaf vacuum.

      Ease of Application: Comes with always moving forward and not in reverse.

      This near universal grass catcher for zero turn mowers has a huge capacity, giving you more than six times the capacity most grass catchers in the market hold.

      For easier emptying and enhanced air flow, it comes with unique tapering features.

      You may attach it to chippers to increase collection bag size giving it side discharge grass catcher universal tendencies. Its fabrication material ensures it survives dragging over gravel and dirt patches or asphalt driveways, even when heavy with grass and leaf loads.

      It measures 96 by 48 by 66 inches and weighs 2.25 pounds. It has dual drawstring clasps that hold it tight to your grass catcher and for easy opening, it comes with a quick release pull cord.

      All these features compare it favorably with other top universal grass catchers for riding mowers.

              PROS

      • check
        Makes your tractor collect and move leaf and grass clippings and not on your back.
      • check
        Over or under the hood mounting design minimizes incidents of leaves blowing on the driver
      • check
        Its universal design enables it fit 2 and 3 bin grass catchers side or front chutes.
      • check
        You can attach it to your leaf vacuum blower, replacing a small shoulder bag.

                CONS

      • The bar attaching the bagger to the mower does not fit tightly. You might need some cheap clamps to keep pressure and leaves in.
      • You may need to attach an old tarp to its trailer hitch to take the weight of the filled heavy giant bag.

      3. Gardena 4029-U Reel Lawn Mower Grass Catcher

      Application: Great for domestic use.

      Effectiveness: Large capacity grass catcher for Gardena Reel lawn mowers except model 4019.

      Ease of Application: You need to study how it works in relation to your Gardena mower.

      This is grass catcher is made of tough nylon and plastic.

      It has a unique working relationship with Gardena lawn mowers making it a quality product from a top quality brand name while making it an excellent addition to your gardening and lawn enhancement equipment.

      This removes it from among universal lawn mower bag products.

      It is a lightweight 3.45 pounds and will take 3.4 by 20.2 by 23.9 of your working space.

      Its big capacity lets you collect between 35 and 49 liters of assorted vegetation from your lawn.

              PROS

      • check
        No tools are needed for its easy assembly.
      • check
        Despite its small appearance, it holds a huge load, it is easy to clean and durable.
      • check
        You can easily fold it for better storage and ease of movement.

                CONS

      • Belt attaching it to cutter handle is d-ring closure type rather than a clip, making emptying and reattaching tedious.
      • It is not a universal grass catcher but suitable for Gardena mowers only.
      • The catcher tends to detach from the mower when changing direction.

      4. Reel Mower Grass Catcher 1ST-SP American Lawn Mower

      Application:Works with 16, 18 and 20 inch real mowers.

      Effectiveness: Functions beautifully when traveling on a level ground.

      Ease of Application: Comes from careful reading of directions and assembling precisely how you are told to.

      This grass catcher stops glass from being strewn all over your lawn. Durability comes from rot-resistant polyester material, a galvanized steel and plastic bottom, and a heavy-duty frame made of wire.

      Convenience arises from adjustable attachment hooks, an ability to fold down for ease of storage, and fitting 20, 18, 16, and 14 inch lawn mowers.

      It takes 25.7 by 18.2 by 2.4 inches of your working space and weighs 1 pound when empty. If you aim to pick a majority of your vegetation, this is your tool.

              PROS

      • check
        It is functional, inexpensive and a helpful addition that makes mowing experience less annoying.
      • check
        Follow the decent easy to follow instructions and you will have it out of the box, clipped onto your mower and working in about 5 minutes
      • check
        An excellent and cheap alternative to racking lawn clippings.

                CONS

      • There are complaints of coming unhooked while the mower is running.
      • Some grass clippings may leak out through the space between the mower and the bag.

      5. Universal Fit Grass Catcher - 5011SC

      Application:Works with any mid-sized walk-behind or ride-on mower with flat sided outlet.

      Effectiveness:Enhanced by a ground clearance rising 6 inches above the lawn.

      Ease of Application: Comes from universal mounting bracket and big inlet.

      This universal lawn mower grass catcher is an excellent leaf collection accessory whose superior airflow slot enhances top filling capacity.

      This means you can put away between three and a half and 4 bushels of grass clipping and other vegetation from your lawn.

      The universal grass catcher for side discharge, although designed for mowers that discharge grass from the right, is intended for attaching to non-SCAG machines for easy and fast lawn vegetation collection.                                  

      Without any load, this universal grass catcher for riding lawn mower will weigh 95 pounds and you will need two bolts to attach it to your mower mounting.

              PROS

      • check
        Its cylinder shape enhances aerodynamic airflow while preventing clippings from piling up at the grass catcher and mower connection.
      • check
        Its enlarged inlet and universal mounting bracket gives its universal grass catcher traits.
      • check
        It comes with an assembly and application instruction manual.

                CONS

      • There are some complaints that it does not fit certain mowers.
      • You will require to assemble it through a one person operation taking about an hour.

      6. MTD Genuine Parts Side Grass Catcher Oem-190-110 Lawn Mower Grass Catcher

      Application:Works with side discharge flip up chute mowers from MTD and Lawn Chief.

      Effectiveness:Convenient alternative to mulching.

      Ease of Application: Easy to work on a lawn that measures less than 75 by 100 inches.

      This walk behind grass catcher is a well-priced light-to-moderate accessory to a side-grass rotary mower. Diagrams and application instructions on its manual are easy to understand.

      It will fit onto your mower just fine and other than the occasional jiggling loose, if you own a bumpy lawn, this bag will give you excellent performance in catching grass from your mower compared to other universal grass catcher for push mower types out there.

      It will give you a 1.6 bushel load capacity, it will take up 16 by 5 by 12.5 inches of your working space, and weigh 5 pounds when empty of any load. You will get a 9 by 5 inch opening size from this grass catcher while the average size is 6 by 4 inches.

              PROS

      • check
        Durability arises from a heavy-gauge steel frame polyester material.
      • check
        Attaches easily to both side-discharge mowers.
      • check
        In the kit are the bag, assemble instructions, mounting hardware, and its frame.

                CONS

      • Assembly may be hard due to an unclear assembly instruction manual.
      • Grass may clog up its grass exiting chute if this is incompatible with your mower.

      7. MTD Genuine Parts Attachments Twin Bagger Kit for 38-Inch and 42-Inch Tractors 2009 and Prior

      Application: Works with MTD, Yard-Man, Troy-Bilt, 38" and 42" side discharge decks 2009 and earlier, Bolens, Huskee, and Toro mowers.

      Effectiveness: What would take hours to rake in your yard takes 30 minutes only with this product.

      Ease of Application: Comes from its twin bag chutes.

      This bagger kit comes with easy to load, tight weave polyester lawn mower grass catcher bag containers.

      With an easy to open lid and its integrated bag straps, using it is a breeze. After your initial setup, its unique fast-attach assembly system makes working with it even easier.

      It comes with optimized venting and airflow systems that reduce clogging, leave behind less thatch and promote a healthier lawn for your yard.

      The kit features a chute, hood, two bags, mounting brackets and hardware. It will take 24.5 by 41.25 by 20 inches of your working space and when empty will weigh 26.8 pounds.

              PROS

      • check
        Easy to follow directions with extra tips makes maintenance easy while ensuring you do your job right.
      • check
        You will save time with its 6.5 bushel capacity and easy to clean construction.

                CONS

      • It sticks out 2 feet from your mower losing clearance as you back up next to scrubs, fence, or buildings.
      • Rubber bands attaching the mower and the bottom chute tend to jump out spraying grass everywhere.

      8. ALDA GROUP 201698 Monster Leaf Bag

      Application: Works best for 2 or 3 bin grass catchers.

      Effectiveness: Its materials are lightweight compared the job it has to do.

      Ease of Application: Comes from its ability to work with five different mowers.

      This riding lawn mower grass catcher may not be a universal lawn mower bag but it has traits that enable it work with five different mowers.

      When full, you will be able to dump its load faster compared to any other grass catcher bag in the market.

      Suffering the nuisance associated with leaf dust will become a distant memory because it has a cone shape, a non-porous and slick fabrication material, and a rear vent.

      It will take 2.5 by 13 by 16 inches of your working space and weigh 3 pounds when empty.

              PROS

      • check
        It emits leaf dust through a vent at the back of the bag away from you, meaning leaf dust will be least of your worries.
      • check
        Comes with an easy to attach ground shield that protects its bottom thereby extending its working life.
      • check
        An opening on both ends gives universal application among five different mowers.

                CONS

      • Complaints arise of thin fabrication material and replacement of rope that tightens to the mover with cheap strings.
      • The tarp protecting the bag tends to snag under the mower wheels or get sucked into the blades.

      9. Soft-Sided 2 Bin Grass Bagger Item, Fits all Poulan Pro 46-inch Riding Lawn Mowers

      Application: Works with 46-Inch Poulan Pro and Husqvarna riding lawn mowers.

      Effectiveness: Makes clearing your yard off vegetation waste a breeze.

      Ease of Application: Easy to mount, well built, and works as it is made to.

      Although this is not a commercial grass catcher, it comes with a dual-bin lawn waste bag container and works exceptionally with Poulan Pro and Husqvarna riding lawn mowers.

      This is so long as these machine versions are 2006 and those that come later, are wide deck, and are 46 inches.

      It is made of toughed polyester and as you work with it, it will take up 39 by 24.8 by 26 inches of your working space. Without its full load, it weighs 19.9 pounds.

      These features come together to make a breeze out of picking up fall leaves from your lawn.

      Do you have lots of rocks on your lawn and not sure how to clear the rocks? This article will help.

              PROS

      • check
        This is a great accessory for your Husqvarna and Poulan Pro riding lawn mower.
      • check
        This lawn mower side discharge bag works great while its sturdy fabrication promises long service.

                CONS

      • There are complaints regarding the rubber gasket between the shoot and hopper coming off easily, spraying debris on the operator.
      • You may need to apply construction glue to both sides of gasket inner lip.
      Wrapping up

      If you carry out your own lawn mowing or need to work around lawns, a great grass catcher will go a long way in making your work complete.

      Many of those you will encounter in the market however have differing features and qualities you will not need.

      Are acorns a problem to your yard? Then these tools will help you sort the issue. 

      Others will only work if you have a specific lawnmower models since they are not universal lawn mower bag products.

      Understanding the features articulated in these reviews will make finding one that ​perfectly suits your needs.

      ​https://growtheherbs.com/lawn-care-faq/

      How to Hide Sprinkler Valves Using Decorative Sprinkler Valve Covers?

      Garden tools

      Best Way to Remove Rocks From Yard 2019

      https://growtheherbs.com/best-insect-killer-yard/

      https://growtheherbs.com/best-lawn-mower-battery/

      how to get rid of rocks in yard

      Best way to remove rocks from yard

      ​How to get rid of rocks in yard

      how to get rid of rocks in yard

      I like talking about the 2 things I found interesting when I bought my current home…one, the grass looked healthy and immaculate.

      But on the hand, the soil in the backyard was extremely rocky. I don’t know how this had escaped me but it meant that I had to quickly find out the best way to remove rocks from yard since I was planning to plant new grass.

      The rock sizes were varied ..some were equal to bowling balls while a few were the size of golf balls.

      Many were in between.

      As it turns out, you have so many options as far as clearing the unsightly boulders from your yard is concerned.

      Well, my new neighbor had promised to convince his 2 teenage sons to help me out (I am still waiting- 5 years later)..

      Obviously, I am now clever and have garnered lots of knowledge about removing gravel from your soil.

      So, can I take you right into this?

      ​Methods to Remove Rocks from the Yard

      The ​right way to remove rocks from yard will depend on how dense are the rocks and how big is your yard.

      From a ¼ acre, you can consider motorized methods such as mini-tractors and tractor attachments.

      Others include heavy-duty machines such as rock pickers and diggers.

      For a small area,manual home tools can work.

      First, let’s look at how you can take advantage of simple, readily available tools to overcome the rocky menace.

      Simple methods to remove rocks

      Using tools such as rakes and shovels is cheaper- since you most likely have them- and convenient since you are already familiar with their operation.

      But you will need to be patient and perhaps have some reservoirs of energy especially if you have a significant amount of boulders in your landscape.

      Here is how to remove gravel from yard without investing in special equipment:

      • Raking

      Raking will help either to move gravel from one part of your yard to another or to gather the rocks together for easier collection.

      • Shoveling

      You can use a shovel to dig out all the small boulders. But ensure you dig deep and also scoop everything.

      This may help you to net the tiny rocks hiding in the ground.

      • Manual hand picking

      Smaller rocks are easier to clear especially if they’re not many.

      You can hand pick them instead of shoveling as it conserves your energy. Involving your family can make the exercise fun and faster.

      • Digging Them Out Using a Bar

      A steel digging bar can be very practical in removing medium-sized stones.

      You will need it to be long and to have a tapered end for an easy operation.

      We use the bar to apply pressure underneath stubborn rocks and unless the rocks are cemented, it can go a long way in popping them out.

      • Screening/filtering out gravel

      Go around your yard picking out rocks with a wagon can be tedious. A smart alternative is you make a mesh-wire screen.

      Once ready, you will then fill it with soil and shake. The rocks will be sifted and be ready for collection in a short while.

      What you’ll need:

      For these simple tactics, you will use typical garden tools including:

      • A Rake

      For rocks, only rakes with tough teeth will do. Remember some rakes are purposed for removing leaves and would bend or break if you attempt to rake rocks with them

      • A Wheelbarrow

      Once you gather the rocks, you’ll need to move them from your garden.

      A wheelbarrow can be your perfect transportation aid.

      • Gloves

      To avoid injuring your hands- especially when handpicking- always wear quality gloves.

      • A Steel bar

      This will help dig out some of the deep-lying big rocks.

      • A Shovel or a Garden Hoe

      You can shovel buried rocks. A garden hoe can be a fantastic alternative when faced with these types of boulders.

      • Bucket

      If you are dealing with reduced amount of rocks, you can use a bucket to move them away from your backyard instead of a wheelbarrow.

      ​What I like about buckets is that you can go with it to parts of your garden where wheelbarrows can’t reach, for example, slanted and slippery zones.

      • Screen/Sifter

      As I had mentioned, a mesh-wire screen can help you sift stones thereby simplify the whole process

      Hand tools that help in getting rid of rocks in yard

      1. True Temper 20-Inches Multi-Purposed Steel Lawn Rake - 2000TT

      This hand rock rake performs exceedingly well in raking rocks. Its head is 20-inch wide and curved enabling it to crowd a big load with every pass.

      The tines are made of tough-grade steel so they are not scared of hardy rocks.

      And with a comfortably cushioned handle, you can work for longer without tiring.

      The other lovable feature is its 54-inch long arm which enables it to reach gravel under the fence.

      2. RAKE ASSASSIN 3-in-1 Garden Tool (Rake/shovel/skim)

      If you want a tool that goes beyond the question of how to get rid of rocks in yard, then this can be a perfect garden servant.

      With it, you will rake and gather the boulders. Then you can also use it to haul and dump them away from your landscape

      And it’s designed with your anatomy in mind so you don’t have to bend as you work.

       Its aluminum hand is 58-inches long and will reach stones hiding beneath objects. It’s also very light.

      3. Midwest Rake Company 11036 Rocks Screening Rake

      With unique non-gouging rounded teeth, this works wonderfully in not only raking but also in sifting stones

      And with a width of 36-inches, you can be sure it gathers a lot every turn.

      The tines are made of a mixture of high-grade aluminum and magnesium and hold up well against shapeless boulders

      The resilient aluminum handle is even longer at 66-inches and feels very strong even when pushing stones.

      In addition, it has a safe non-slip vinyl grip

      4. Sand Beach Pond/River/Lake Rake

      The rocks found in shorelines are the toughest and can easily break your rake.

      And so if your yard is full of such confrontational stones, you’ll need a tool which is similarly combative.

      This rake is designed to help you capture all big and small boulders in your landscape.

      It easily picks them up, and then sifts the soil, before dumping them.

      It’s sturdy, light, and slanted at a nice angle to help make your work easier.

      5. Toolite 49492 #2 Square Shovel, 48-inches Wood Handle

      By all standards, this is one the ​top rated shovel tool for rocks.

      Its blades quickly release mud while the chores are reinforced with fiberglass to make them durable.

      The steel heads are heavy-duty and will neither break nor bend.

      It’s wider and will scoop more soil than typical shovels.

      I also noted that it’s lighter than many of its peers.

      Being ergonomic, you’ll work for longer with less fatigue

      And even though it’s wooden, don’t expect the handle to break- it’s very thick.

      6. RockHound 72B Heavy-duty Landscape Rake

      If you have a big yard, and you are dealing with huge volumes of stones, ​I would advise you  to go for industrial grade landscape rock removal equipment

      This magnificent rake will pick up everything- from tiny rocks all the way to even those larger than 8-inches- and load them in a bucket in one run.

      Its tooth bars are high strength and easily replaceable.

      The top cover opens up to enable you to easily dump gathered stones.

      You can also attach it to your tractor using a separate adapter if you want a quick job.

      Professional tools for rock removal

      In the meantime, some rocks could be too big and cannot be moved with anything but professional- equipment.

      Of course, you can work the biggest stones to become beautiful landscaping pieces but if not, the good news is that these tools need less effort and do a thorough job.

      Here are some of the special tools and implements you can rely on if you are looking for professional results.

      ​Rock removal attachments for tractor

      A machine to pick up rocks in yard such as a rock removal attachment for tractor saves you time and energy.

      Although expensive, these expertly excavate giant stones that would otherwise be too much for your small hands.

      Now, since it was my first time to consider tractor attachments, I decided to snoop around and see what the market had to offer.

      ​Related product reviews and guides:  men winter gloves

      Tell you what?

      I found so many mighty options on Amazon and Degelman.

      My favorite was the BobCat skid steer.

      I like calling it the small magician because of how it works.

      It loosens the soil nicely, levels the ground, and skillfully brings out the rocks to the land.

      1. Landscape Rock Rake /Gravel Lawn Tow-Behind Tractor 5ft York (3-Point Soil)

      With heat-treated replaceable steel tines, this efficiently handles heavy rocks and amasses them together with the rest with a few passes.

      It rotates 360 degrees and can also rake in reverse so it easily gets hold of the stones lying under fences.

      It’s well made and easy to assemble while the price is affordable.

      Lastly, it needs very little maintenance.

      2. Agri-Fab 45-0366 Rock RakeGround-EngagingAttachment Sleeve Hitch (GT)

      For large lawns, you’ll need an attachment with a wider working width so as to minimize the time it takes to clear the landscape.

      This has a 48-inch working width and quickly collects rocks from large yards.

      Again its 1/4" steel tangs are heat-treated giving them the toughness and strength necessary to pick large boulders without bending or breaking.

      It’s a heavy-weight attachment rake and works well even in uneven yards.

      3. 72-inch Root Grapple Rake Attachment rock tractor Skid Steer Loaderbobcat

      A “bobcat” (skit steer loader) is a popular compact gravel scooping machine.

      It fetches rocks, dumps them into the carrier, and also levels the ground ready for planting.

      Its 72-inch grapple rake can pick everything – including the odd shaped stones.

      The wide opening grabs and holds a large load of rocks at once reducing the time required to clear your ground.

      Its 24-inch long teeth easily lift heavy boulders, studs, and other heavy debris.

      Attaching a bobcat to a tractor is straightforward thanks to its universal hookup.

      4. Kolpin 60-Inch Landscape Rock Rake - LSR60

      You can set this machine to remove rocks from soil to 5 different angles for an improved rock collection job.

      The rest of the features make it a reliable performer:

      They include the 60-inch working width which provides one of the widest coverage.

      Then we have the 16-inch long tines which have been hardened to enable the tool to rake larger rocks without giving in.

      As expected, the 3-point hitch system maximizes traction and ensures the attachment is stable even when pulling heavy rocks.

      Large rock removal from yard

      As we said, large boulders are more difficult to remove because they are heavy to lift.

      Apart from using the tractor attachments and other vehicles, you still have some more cool options:

      • Split the boulders

      Rather than bother your neighbor by asking them to help you roll the stone to the fridges, you can split it into smaller pieces which you can easily carry into your wheelbarrow.

      Here is how to break big rocks:

      • Use feather and wedges

      You drill holes into the rocks using your electric rotary hammer, blow lingering dust (from the holes) before finally dropping 2 feathers and a wedge into every whole.

      You then pound the wedges (into the holes) using a heavy sledgehammer until cracks show up.

      • Use Chemical Compounds/Powders

      If you find the feather-wedge method tiring, you can use popular powders such as Dexpan to silently crack the rocks.

      As you will see below, these compounds are pretty easy to use: you just drill holes, mix the compound, apply it to the hole then wait for cracks galore!

      ​​

      Use a jackhammer/Sledgehammer

      Rock breaking tools such as sledgehammers and jackhammers help in breaking up the biggest, hard-to-lift rocks.

      Though energy sapping, they help you breakup the rocks into the desired smaller and manageable pieces.

      Again, out of curiosity, I wanted to see what rock splitting aids are out there.

      Here is what impressed me…

      1. Dexpan Expansive Oversized Rocks Demolition Grout 11 Lb.

      Instead of struggling with a sledgehammer or feather and wedges for splitting rocks, you can go for this powerful powder.

      And it’s very simple to use:

      You drill some 1.5-inches diameter holes into the giant boulder. Then, take a bucket and mix 1.5 liters (of water) with one 11 lbs. bag of the powder- ensure you mix well.

      After about 10-15 minutes, pour the mixture into your holes.

      After 24 hours, your rock will have broken into pieces.

      This lethal chemical works silently and won’t spare any rock.

      2. Ecobust USA Rock Breaking Non-Combustive Demolition Agent

      This is another rock demolition agent. You still drill holes, mix, and then pour the mixture.

      It’s so energetic and kills even the hardest stones within a couple of hours.

      It’s easier to mix and apply.

      It also leaves little carbon footprint and is recommended by environmentalists.

      And just like the Dexpan powder, it’s a silent killer!

      3. Choice 22-Ounce All-Steel Rock Hammer ,Pointed Tip, 11-Inch

      Still, on how to break large rocks by hand, a good hammer can do- and I mean a good hammer.

      This all-steel hammer is specially engineered and destroys rocks effortlessly.

      The pointed tip and heavier head(22-oz.)plus the 11-in. long handle help balance power-to-weight to great effect.

      When you are striking the tough boulders, its unique design increases your swing speed and multiplies the striking power breaking up everything into smithereens.

      And the ergonomically designed rubber grip ensures that swinging won’t shock or injure your wrist.

      4. SE 8399-RH-ROCK Rock Hammer 11-Inch, 20 Oz.

      This rock hammer is forged to be one brawny piece of steel with a hardened head and a sharp tip.

      Overall, it weighs just 2 lbs. making it easier to control and amplify impact for better results.

      The comfortable grip rubber handle is 11-inch long and considering that the head weighs in at 20-oz. , it’s well-balanced to attack the hardest stones.

      It’s heavy, durable, and very consistent.

      • Blow it Up! 

      Blowing up the annoying rock can be fun- though your neighbors may not like the noise and may call you names.

      It’s also important for you to follow all the safety instructions.

      Heavy-Duty Rock Removal Equipment on Degelman.

      Now, how do you excavate and clean up strong-willed boulders from expansive landscapes such as golf courses?

      Your humble shovels and rakes will surely have little going for them on such grounds.

      One because the amount of stones is huge and secondly because you are pretty much guaranteed to meet some gigantic rocks.

      Now, Degelman has been making high-level farm equipment for 55 years and seems to have a trick or two up their sleeves.


      They’ve some robust rock removal solutions.

      Let’s briefly go through some of these top-rated rock removal machines.

      1. Rock Digger RD320

      For submerged rocks, you can use the Degelman RD320 rock digger.

      Its 32-inch long and 2-inch thick teeth not only dig out submerged rocks but also grab, lift, and transports boulders to the hauler or the chosen location.

      The teeth are rugged and angled so it smoothly glides into the soil even when wet.

      These serrated grabbing teeth allow for better gripping of the rocks.

      You will find it easier to control and handle.

      2. Degelman Rock Rake

      A heavy-duty boulders rake,this 14-inch wide spiral rakes a vast swatch of rocks with each pass.

      Amazingly, it’s designed in a way that it folds into a compact size when navigating narrow gates and bridges- very convenient when raking expansive landscapes.

      Apart from its rugged construction, the tension springs are backed by 12-gauge wire and absorbs impact enabling it to keep move over any large obstacles in your field.

      More carbon content makes the teeth less prone to breakage while the robotic hard-surface treatment means it can serve for many years.

      Plus you can reverse its teeth if you want to double their lifespan!

      3. Prong Rock Picker R570P

      If you want help in picking giant rocks, the prong rock picker can comfortably pick a boulder weighing a whopping 3000-pounds!

      A rock picker of impressive talents, this simple forklift-like machine incorporates sprightly spring steel tines which won't break or bend.

      The 2 hydraulic cylinders give it the power to pick and to unload with speed and remarkable efficiency.

      It’s quite simple to operate with one hydraulic lever managing the hopper (for unloading) as well as the grill (for picking).

      4. KingRock Picker

      Degelman calls it the largest rock picker in the market and you can see why:

      It has an unbelievable 8-inch wide grate, an imposing 6’9-inch dump height, and an enormous bucket (5 cubic yard).

      You will work longer at the windrow, pile up higher, and deliver an unparalleled performance in extremely rocky grounds.

      Even better, the bushings are a rare type and do not need maintenance making it very cheap to run.

      It has hardened rods don’t rust and could be last for years.

      Wrapping up

      There’s no single best way to remove rocks from yard.

      Rather, you have to check the size of the rocks, their quantity, the size of your garden, and even your experience.

      For small rocks, you can go for handpicking –provided they’re not that many, a sifter, or a rake.

      For those hidden on the ground, a shovel can be very useful.

      Medium and large boulders are more difficult and you may have to invest in tractor attachments and in cases of huge grounds, some heavy-duty rock removal equipment.  

      Another easier option is to break up the rocks into manageable pieces.

      Yes, rock removal can be taxing and needs patience.

      However, the fruits of having a clean yard make the whole effort worthy.